Page 48 - CRESTRON HOME OS-3

Device with Existing Credentials
To add a device that was previously removed from a Crestron Home system, a device that was
part of a different Crestron system, or a device with existing credentials, follow these steps:

1. Upgrade the firmware for the device or the Crestron Home processor.
2. Add the device to the system. To add a device, refer to Step 2: Pair Devices (on page 44) or
to add a gateway, refer to Add and Manage Device Gateways (on page 87).

3. When the device is added to the system, you will be prompted to enter admin credentials
for the device. The admin credentials are required to create the Common Device
credentials on the device.

NOTE: If the device is being added back to the Crestron Home system that it was
removed from and the Common Device credentials were used with the device prior to
removal, you can enter the Common Device credentials that were last used with the
device.

4. Enter the admin credentials for the device and then select OK.
5. The Common Device credentials are assigned to the device and the device is added to the
system.

NOTE: If the Common Device credentials were set on the device and they do not match
the Crestron Home processor, the common device password on the device is updated.

Supported Devices

The Common Device credentials are supported by these devices:

Device Minimum Device Firmware Minimum Crestron Home Firmware
CEN-GWEXER 1.4469.00011 3.000.0548

CEN-IO-COM-202 1.4210.40 3.004.0071
CEN-IO-COM-102 1.3408.24 3.004.0071

CEN-IO-DIGIN-204 1.4210.40 3.004.0071
CEN-IO-DIGIN-104 1.3408.24 3.004.0071
CEN-IO-IR-204 1.4210.40 3.004.0071

CEN-IO-IR-104 1.3408.24 3.004.0071
CEN-IO-RY-204 1.4210.40 3.004.0071

CEN-IO-RY-104 1.3408.24 3.004.0071
DM-NVX-363 2.1.3900.1067 3.004.0071

DM-NVX-363C 2.1.3900.1067 3.004.0071
DM-NVX-360 2.1.3900.1067 3.004.0071

48 • Crestron Home™ OS Product Manual — Doc. 8525Z