Page 55 - CRESTRON HOME OS-3

Add Crestron Wired and Wi-Fi Devices

NOTES: When adding SONNEX and DigitalMedia switchers, endpoints and expanders cannot
be added to the system after the Crestron Home system discovers the switcher.

l SONNEX: Verify that all endpoints, expanders, and SWAMP extenders are connected,
wired, and powered on before adding the Audio Switcher to the system. Endpoints,
expanders, and SWAMP extenders cannot be added to the system after the Audio
Switcher is discovered.
If an endpoint or expander is connected after the Audio Switcher is added to the system:
The Audio Switcher must be deleted from the system and then re-added. All
programming for the Audio Switcher will be lost and will need to be reprogrammed.
l DM Switchers: Verify that all DM input cards, output cards, and room boxes are
connected, wired, and powered on before adding the DigitalMedia Switcher to the
system. DM input cards, output cards, and room boxes cannot be added after the
Crestron Home system discovers the DigitalMedia switcher.

If a DM Input Card, Output Card, or Room Box is Added after the DM Switcher is Added
to the System: The DM Switcher must be deleted from the system and then re-added. All
programming for the DigitalMedia Switcher will be lost and will need to be
reprogrammed.

Add Crestron Wired and Crestron Wi-Fi Network Device to a Room

To add Crestron wired and Crestron Wi-Fi® network devices, including DM® switchers, DM-RMC
series room controllers, and DM NVX® devices, to the room:

NOTE: After a TSW-xx60 series touch screen or compatible handheld remote is added to the
system, the Crestron Home user interface is loaded to the device.

Product Manual — Doc. 8525Z Crestron Home™ OS • 55