Page 585 - CRESTRON HOME OS-3

Deploy a Configuration

Use a Deploy code to load the configuration onto a Crestron Home processor for the first time or
to update (Redeploy) a configuration.

Use these methods to load the configuration:
l Load the Configuration onto a New Processor: To load the configuration onto a new
processor, refer to Load Configuration onto a New Processor (below).
l Load the Configuration onto an Existing Processor (Erase Data): To load the configuration
onto a processor that is already programmed and erase the existing configuration, refer to
Load Configuration onto an Existing Processor (Erase Data) (on page 589).
l Update a Configuration (Redeploy): Redeploy a configuration to merge the updates with a
processor that is already running. To Redeploy a configuration, refer to Update a
Configuration (Redeploy) (on page 589).

Load Configuration onto a New Processor

To load the configuration onto a new Crestron Home processor:
1. Open the Crestron Home Setup app and then connect to the Crestron Home processor.

NOTE: If the Crestron Home Setup app does not connect to the Crestron Home
processor automatically, enter the Crestron Home processor's hostname and select
Connect. The default hostname for a Crestron Home processor is "[Product-Name]-
[MAC Address]" (excluding punctuation). For example, "CP4-R-123A567B91C3." The MAC
address label is located on the bottom or rear of the device.

Product Manual — Doc. 8525Z Crestron Home™ OS • 581