Page 68 - CRESTRON HOME OS-3

Add Driver Devices

Add Crestron Driver devices to the Crestron Home system to control devices that are
manufactured by other companies. Crestron Drivers are used to add Crestron and third-party
devices to the Crestron Home system.
The devices displayed on the Drivers screen consist of Crestron Drivers that are downloaded
from the Crestron Driver portal or side-loaded onto the Crestron Home processor.
To create, update, and delete Crestron Drivers, refer to Crestron Driver Devices (on page 842).

NOTE:

l Crestron Drivers that are tested by Crestron, and legacy security system drivers, are
marked with the Crestron swirl logo.
l Only devices with discrete on and off commands should be paired with the system. If a
device with an auto-off timer is added to the system, the device may turn itself off while
the room remains on. This behavior causes the device to power on and become out of
sync with the room after the room is powered off.

Add a Driver Device to a Room
To add a Crestron Driver device to a room, follow these steps:

1. Select the room where the device is installed from the Select a room menu.
2. Select Drivers from the Device Types menu. The Crestron Home processor updates the list
of Crestron Drivers.

68 • Crestron Home™ OS Product Manual — Doc. 8525Z