Page 702 - CRESTRON HOME OS-3
P. 702
Serial Control
l Control Type: Displays the type of control for the display.
l Control Point: Displays the hardware connection for the COM port. To change the control
point, tap the gear icon next to Control Point and then select a COM port from the Control
Point list.
l Configuration: Displays the settings for COM port communications. To change the
settings, tap the gear icon next to Configuration and then select the settings for the Baud
Rate, Parity, Data Bits, Stop Bits, HW Shade, and SW Shake parameters.
Product Manual — Doc. 8525Z Crestron Home™ OS • 685
