Page 726 - CRESTRON HOME OS-3

Override the LED Backlight Levels
To override the default LED backlight levels:

1. Tap the Override Backlight Levels check box.
2. Set the LED backlight levels. Tap the up or down arrows to increment the values by 0.1%
or tap and hold the button to increment the values by 1%.
l Day Active: The LED backlight level when the button feedback is on and keypad is in
Day mode.
l Night Active: The LED backlight level when the button feedback is on and keypad is
in Night mode.
l Day Backlight: The LED backlight level when there is no button feedback and keypad
is in Day mode.
l Night Backlight: The LED backlight level when there is no button feedback and
keypad is in Night mode.
Calibrate the Light Sensor
To calibrate the light sensor, tap the Calibrate Light Sensor button. The faceplate and trim
pieces must be installed on the Horizon keypad before the calibration process is performed.
While the calibration process is running, avoid blocking the light sensor on the bottom of the
keypad; the light sensor should remain unobstructed and free of direct light.

Local Button Settings
Tap the Local Button Settings tab to configure the LED feedback for the local button.

Set the Button Feedback Mode:
l On Only: The LED lights when the scene is on.

l Center Text Only: The LED for the center of a rocker button lights when the scene is on.

Product Manual — Doc. 8525Z Crestron Home™ OS • 709