Page 769 - CRESTRON HOME OS-3

Tap the Interrupts tab to configure the interrupts for the security system.

NOTE: Touch screens that do not have speakers display the interrupt messages but cannot
play the associated sound.

l Event: The action that triggers the interrupt. The available events are displayed in a drop-
down menu. Configure the interrupt settings for all events.
l Enabled: To enable or disable the interrupt for the device, tap the check box next to
Enabled. When an interrupt is enabled, it is displayed in the Crestron Home user interface.
l Bypass Do Not Disturb: Tap the check box to override the Do Not Disturb setting for the
room and play the chime for the interrupt.
l Message: The message that is displayed on the user interface device when the interrupt
occurs. The default interrupt message is "[Device Name] ([Event Name]) in [Room
Name]." For example, "Security System (Fire) in Atrium."
To display a custom message, enter the message in the field. Tap the Reset button to
revert to the default interrupt message.
l Mute Whole House: To mute the audio that is playing in any media room, tap the check
box next to Mute Whole House. The audio is muted for the time set in the Duration field.
The default Mute Whole House setting is enabled.
l Duration: The message and chime persists until it is dismissed by the system.

752 • Crestron Home™ OS Product Manual — Doc. 8525Z