Page 779 - CRESTRON HOME OS-3

l Max Time: Sets the maximum time that the motor can move in the open or close direction.
The value can be set between 1 and 600 seconds.
l Lockout Time: Sets the minimum amount of time that the motor must remain in the stop
state before changing direction. The value can be set between 0.02 to 2 seconds.

l Jog Time: Sets the time that the motor will move during a jog open or jog close operation.
The value can be set between 0.05 and 2 seconds.
l Slave Switch Type: Sets the type of slave switch that is connected to the motor controller.
The slave switch can be set to either Momentary or Sustained.

Tap the Replace Device tab to replace the device.

762 • Crestron Home™ OS Product Manual — Doc. 8525Z