Page 78 - CRESTRON HOME OS-3

l Relay Controlled Device: Use a relay controlled device to add a device that is controlled by
a relay. Relay controlled devices do not have automatically generated control elements
added to the user interface. Control the relay device using Quick Actions (Create Quick
Actions (on page 135)) and Media Zone Events (Configure Media Zone Events (on
page 157)).
The following relay controlled devices can be added to the system:

o Fireplace
o Fountain
o Garage Door
o Gate
o Irrigation Zone

o Lift
o Screen
l Sensor Device: A sensor device monitors the state of the device and provides the feedback
to the system. Depending on the programming, the system can play an interrupt or
activate a Quick Action or Scene.

The following sensor devices can be added to the system:
o Burglary Alarm
o Door Sensor

o Doorbell
o Driveway Sensor
o Fire Alarm
o Occupancy Sensor
o Smoke Alarm
o Water Alarm

o Window Sensor
l Button: Use the Button input device to control the system using a contact closure remote
keypad. Connect the contact closure remote keypads to a digital input in the system (for
example, on a Crestron keypad or control processor), then program the button as if it was
a keypad. For details, refer to Configure Contact Closure Keypads (on page 237).

NOTES:

l Uncontrolled and relay-controlled devices must be connected to the appropriate
hardware in order to function properly in the system. For example, the garage door and
the garage door sensors must be connected to the Crestron Home processor or control
module.
l When a garage door, gate, camera, or BACnet Thermostat is added to the system,
control elements are added to the to the user interface device.

78 • Crestron Home™ OS Product Manual — Doc. 8525Z