Page 845 - CRESTRON HOME OS-3

Assign All On, All Off, All Open, and All Close Scenes

Assign room-level All On and All Off light scenes and All Open and All Close shade scenes to
Lutron buttons. When the All On and All Off light scene and All Open and All Close shade scenes
are configured, the On/Off or Open/Close functionality of the tile in the Crestron Home User
Interface is enabled.

NOTES:

l The Lutron keypad must be able to provide LED feedback to assign an All On, All Off, All
Open, or All Close scene.

l To make sure that the Crestron Home user interface provides accurate feedback, set the
LED Logic to Scene in the Lutron programming software.
l Crestron® lighting components create All On and All Off scenes and shading components
create All Open and All Close scenes when they added to a room. Lutron scenes cannot
be assigned as the All On, All Off, All Open, or All Close scene if the scenes already exists
in the room. To remove the All On and All Off light scenes or All Open and All Close shade
scenes, the room must be removed and then re-added to the system. For details, refer to
Create and Manage Rooms (on page 37).

To assign the All On, All Off, All Open, and All Close scenes:

1. Tap the Configure Lighting Scenes button or Configure Shade Scenes button on the Setup
Scenes screen to display the Light Scenes or Shade Scenes screen.

2. Select a room from the List of Rooms menu.

3. Select a Lutron button from the List of Scenes menu and then tap the wrench button
next to the button name.

828 • Crestron Home™ OS Product Manual — Doc. 8525Z