Page 894 - CRESTRON HOME OS-3

Keypad Button Modes and Button Functions

Crestron and third-party keypads support different button functions based on the Button mode
that is selected. For example, the Scene button mode supports Built-In Functionality and Multi
button functions; the Quick Actions button mode supports Tap, Double, Hold, and Multi button
functions; and the Shade Room button mode supports Tap and Press and Hold button functions.
Each button mode and button function perform a defined action. Refer to the table that follows
for a list of button modes and the button functions that they support.

NOTE: Every button on a keypad can be assigned to a different button mode.

Button Mode Button Function Button Behavior
SCENE

Built-In Functionality: Always Recalls Scene: Recalls the
scene.
Tap: Recalls or toggles the scene with
the defined fade time. Toggles Scene/Off: Toggles the scene
on and off.
Double Tap: Immediately recalls or
toggles the scene. The fade time for the Custom Toggle: Toggles the On
scene is bypassed. Actions and Off Actions. Assign
different scenes to the On Action and
Press and Hold: When Enable Dimming
Off Action.
for Lights is enabled. Raise or lower the
lights. The load raises or lowers based
on the action that was performed last.
If the load was turned on or raised,
press and hold the button to lower the
light level. To turn off the lights,
continue holding the button after the
minimum light level is reached.
Multi: Multiple button presses can recall up Not Available
to 10 scenes and provide the ability to cycle
through scenes.

QUICK ACTIONS
Tap: One button press to recall the quick Not Available
action.
Double: Two button presses to recall the
quick action.
Hold: Press and hold the button to recall the
quick action.
Multi: Multiple button presses can recall up Not Available
to 10 quick actions and provide the ability to
cycle through quick actions.

Product Manual — Doc. 8525Z Crestron Home™ OS • 877