Page 241 - Product Catalog 2020 FULL1_Neat
P. 241
Wet Switch Flood Detector Pipe Mounted Switches
Hockey Pucks DiversiTech Flood Prevention Switches
are simple to install, easy to service and
extremely reliable. As water level in the
• A solid state control designed to help auxiliary or main drain pipe rises due to
prevent flooding, damage to carpets, a clogged air conditioning condensate
walls, furniture, ceilings, etc.
• Built in test and reset button for easier drain, the switch shuts off the system -
installation thus preventing water from overflowing
• Turns system off when detecting and causing damage to doors, walls TCS-1
moisture due to condensate or drain leaks.
moisture due to condensate or drain leaks. and ceilings. At the heart of the switch
One or two drops will cause Wet Switch to TWS-1 is a durable yet precise magnetic
TW
S-1
turn off a unit, alerting a serviceman to a reed switch. Constructed of materials HVAC PRODUCTS
moisture problem that will not rust or stick, the switch TCS-2
• Lit LED indicates the Wet Switch is operates smoothly every time. 08
activated and has turned the unit off Approved, c us isted.
• Reset simply by drying the absorbent pad
with a paper towel and pressing the reset
ORDER
switch CAT. DESCRIPTION UOM MULTIPLE
NO.
• Connects to 24 VAC
Condensate Switch – Tee
TCS-1
• More than one unit may be connected to TCS-2 Condensate Switch – Elbow EA 1 1
EA
a system
• 2 amp contact rating
• Simple 5 wire installation Condensate Cop™
• 08 Approved
• ET isted File Number 1 2.
Condensate Cop™ is a unique clamp on
float switch intended for HVAC drain pan
CAT. DESCRIPTION UOM ORDER installation. The Condensate Cop features
NO. MULTIPLE
TWS-1 Wet Switch Flood Detector EA 1 a large over clamping area that fits easily Condensate Management
over the edge of all types of drain pans TCC-1
including formed plastic and galvanized
CS-3 Condensate Pan Switch sheet metal. A separate float/probe assembly swivels to accommodate
drain pans having sloped sides. The swivel action allows the installer
to position the float switch for best operation and then clamp it into
place. The probe features an inlet grill which prevents the float from
being blocked or damaged by insulation or other debris. Sealed inside
the probe is a magnetically actuated normally closed switch. The switch
The CS-3 is a clip-on pan switch that uses opens when rising water presents a potential flooding condition.
a magnetic reed switch for condensate • Two wire connection for easy hook up to a thermostat “ compressor
overflow protection circuit
• ’ 1. meter leads, wire nuts, and clamping screws
• cULus Listed • Small si e, 2 V/1. amp NC reed switch
TCS-3 • ET isted File Number 1 28 08 Approved
CAT. ORDER
NO. DESCRIPTION UOM MULTIPLE CAT. ORDER
TCS-3 Condensate Switch – Clip EA 1 NO. DESCRIPTION UOM MULTIPLE
TCC-1 Condensate Cop™ Drain Pan Switch EA 1
LuxPro Thermostats Plastic Thermostat Guards
• Used to prevent tampering with thermostats
• uxPro thermostats are designed to be a • Covers are clear, allowing complete viewin of
the thermostat and current settings
reliable, simple solution to in home comfort, • Includes vent holes for easy airflow across
so that everyone can en oy the benefits and the thermostat
comforts of advanced temperature control • ockable with universal key
T675-PSD111 T585-TG1 • Includes mounting screws and key
CAT. DESCRIPTION UOM ORDER
NO. MULTIPLE CAT. DESCRIPTION T-STAT CLEARANC UOM ORDER
T675-PSDO10BF Digital for Heat Only, with Fan Switch EA 1 NO. MULTIPLE
EA
T585-TG Clear Plastic w/Two Bases 8-1/4” x 4-1/2” x 3-1/4”
T675-PSD111 1H /1C, Non-Programmable, EA 1 T585-TG1 Clear Plastic w/Two Bases5-3/4” x 3-1/2” x 2-3/4” EA 1 1
Vertical/Horizontal
T585-TG6 Clear Plastic w/Two Bases 6-1/4” x 3-3/4” x 1-3/4” EA
T675-PSDH121 1 or 2 H/C, Non-Programmable, EA 1 T585-F336 Key for Thermostat Guard EA 1 1 H2
Vertical/Horizontal
www.morrisproducts.com 1-888-777-6678