Page 46 - Catalogue ANGLAIS 2016_Neat

Rotary Switching box BCR & Individual Plugs boxes BPI

CHARACTERISTICS

Dimensions (naked case) :
400 x 300 x 200 mm

Dimensions (with legs) :
400 x 420 x 200 mm

Material :
Stainless steel

Types of BPI :
5 individual plugs

Types of BCR :
APPLICATIONS
APPLICATIONS For 5, 10 or 20 sensors

The boxes of grouping are placed on works instrumented to Sensors that can be read :
facilitate the measures of every type of sensor by an operator. Vibrating rope
Inductive
Accordingly to the number of sensors, the type of cable and the 4-20 mA
technology appropriate to every installed sensor, two types of cases mV
are used to the grouping and to select the way of measure of every Potentiometric
sensor: The box to Individual plug(s) (BPI) and/or the Case with
Rotary Switch(es) (BCR).

DESCRIPTIF
DESCRIPTION Entry of cables:
The BPI and/or the BCR are boxes allowing acquisitions of measures Cable clamp press
by an operator on several types of sensors in a single point of
grouping.
Typical boxes BPI and BCR are proposed in stainless steel allowing to Permeability:
be installed according to prescriptions in difficult environment. IP66
After every operation of measures the door of the boxes must be
closed to maintain the waterproofness and the protection from
corrosion of the various elements of connections.
Various nuances of material for the casket and various systems of
closures are optional according to specifications can be proposed. Options :
On a BPI, every sensor is connected to a specific individual plug Lightning conductors
corresponding to the measurement technology of the concerned Closure with key
sensor and as a consequence to the only model of readout unit that Several types of bases
must be used for the acquisition of the measure by an operator.
On a BCR, only the same type of sensors are linked together, via a
rotary switch which allows to select every way of measures. A single Accessories:
base is linked with the (x) rotary switch(es). This specific base
corresponding to the technology of the concerned sensor and Borniers to screw (BCR)
Borniers To weld (BCR)
therefore to the only model of measuring station that must be used for Base of earthing connection
the acquisition of the measures of every sensor by an operator: for
example from 5 to 50 sensors of the same type of technology
"vibrating wire".
Géo-Instrumentation - S.A.S. au capital de 37000 € - RCS Créteil B502768427 – APE : 7490B - N°TVA : FR10502768427