Page 632 - Womens Pavilion

4.6 Diamond® Quick-Connect Key Style Frontbody Assembly
Chapter 4
4. Remove all of the internal parts from the twist-lock replaceable barrel assembly
(B) by performing the following:
a. Carefully remove the frontbody secondary piston spring (C).

b. Remove the secondary piston (D).

c. Remove the frontbody piston O-ring (E) from the secondary piston (D).

d. Remove the spring (F).

e. Remove the frontbody piston (G).

5. Remove the parts located at the front of the twist-lock replaceable barrel
assembly (B) by performing the following:
a. Remove the O-ring (H) from the front of the twist-lock replaceable barrel
assembly (B).

NOTE:
The adapter locking spring clip in the frontbody keying disc assembly can be
accessed through the opening from which the twist-lock replaceable barrel assembly
was removed.

b. Remove the frontbody washer (I) from the frontbody keying disc assembly
(K).

c. Using the needle nose pliers, remove the adapter locking spring clip (J) from
the keying disc assembly (K). 4

Replacement

1. Inspect the parts of the frontbody assembly for excessive wear or damage.

2. Replace defective parts as necessary.

3. To install the replacement Diamond® Quick-Connect frontbody assembly,
reverse the removal procedure.

4. During the replacement procedure, ensure that the frontbody secondary piston
spring (A) is seated properly onto the secondary piston (B) groove (see figure 4-
7 on page 4–14).

DiamondCare® Recessed Wall Outlet and Electrical Accessories (MAN01-045) Page 4-13