Page 21 - Apprentice Manual_Neat

--remote fan coolers
--heat exchangers
--radiator caps
--belts
--sensors (level, temperature, etc.)
--radiator plugged
b Test system for operation
c Interpret temperature differential (Delta T)
d Check for conditioner and concentration
e Conduct testing on cooling system
--pressure testing
--freeze protection
--boiling protection
--air flow/ventilation
f Identify contamination and cavitations problems
g Inspect and clean radiator
h Inspect and replace filters/supplemental cooling additives

Reference:
EGSA (2015). On-Site Power Generation Reference Book, Fifth Edition. Boca Raton, Florida:
Electrical Generating Systems Association. Chapters 14

Task 15) Maintain/inspect air induction systems

a Inspect and/or replace
--air cleaners
--turbo chargers/blowers
--air box/damper/flapper
b Calculate air quantity
c Inspect for proper filter system
d Clean or replace filter system
e Indentify problem
--identify air restrictions
f Test emergency shut down
g Check crank case breather or vent tube if applicable
h Determine boost pressure
i Determine waste gate
j Determine difference between manifold and boost pressure

Reference:
EGSA (2015). On-Site Power Generation Reference Book, Fifth Edition. Boca Raton, Florida:
Electrical Generating Systems Association. General Reference

Page 13 - EGSA Apprentice Certification Program Study Guide