Page 6 - Di' Aroma Mars

TROUBLESHOOTING & MAINTENANCE

TROUBLES ELIMINATION MAINTENANCE
METHODS
Check the power supply Connect the power supply
NO LCD indication and the switch again and turn it ON

Check the power supply; Connect the power supply
check the pump working or again to check the pump
NO atomization not; check the working and set the program again
status (working time or
pause time)
Check the atomizer if block Clean the atomizer and
Small atomization amount or not; check the pump change the pump
good or no

Check if the atomization Tighten the atomization
Comes out liquid oil from connector is loose or not connector and make the
external atomization Check if the machine is machine upright
connector lean or not

Check if the oil bottle is Tighten the oil bottle and
Oil Leaking loose or not: Check if the bottle seal
bottle seal is lost or not

OPERATION FOR ADDING AND CHANGING THE OIL

For the first time to the machine, please tighten the oil bottle before connecting
power supply, Set the working time and adjust the aroma concentration.

If need to add or change the oil, please cut down the power supply. Then open
the machine with the key rotate the empty oil anticlockwise to take out the bottle
to put the oil in again and finally clockwise rotate the bottle and make sure it is
tight. Then connect the power supply again.

thenaturearoma.com