Page 495 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

PTFE Tape Shock Extensions
MRG2842G MRG1290
PTFE sealing tape is unaffected by fuel or oil and Use stock length shocks on the rear of raised vehicles. Shock extensions
increases the sealing capability of all threaded attach directly to shocks with 3/8"-24 stud and are sold in pairs.
fittings. Tape is 1/2" wide x 260" and packaged
in a resealable container. Traction Bar Wedge Sets
Wedge sets allow adjustment of traction bar snubber
Aluminum AN Wrench Set clearance or pinion angle on leaf spring-equipped cars.
MRG33200G Sold in pairs.
Seven-piece wrench set Part No. Description MRG1606
eases the assembly MRG1606 2° Wedge Set
and maintenance of AN MRG1607 4° Wedge Set
fittings. Constructed from Traction Bar Snubbers
6061-T6 alloy, wrenches are MRG1608
stamped and color-coded for
easy identification. Double-ended Rubber bumpers are typically used as snubbers for traction
wrenches cover -3AN to -20AN. bars, or as control arm bumpers to limit suspension travel.
Threaded base allows easy installation. May be trimmed
for adjustment. Sold in pairs.
Fast-Fill Funnel
MRG3695
Automatic Transmission Pan Gaskets
Heavy-duty unbreakable plastic funnel has wide mouth
and narrow filler tube with built-in brass screen filter. 6 Cork/neoprene gaskets offer excellent com-
quart capacity. pressibility and greater thickness for a positive
seal. Sold individually.
Part No. Description
Electric Fuel Pump Relay
MRG8690 GM Turbo 350
MRG40H MRG8691 GM Turbo 400
GM Powerglide
Kit helps maximize electric fuel pump perfor- MRG8693 Chrysler TF-727
MRG8697
mance, ensuring maximum voltage is supplied to
pump. Includes 30-amp relay, butt connectors, Ring Gear Spacer
and necessary wiring. MRG902A
Designed for popular 1965-72 GM passenger car
Starter Motor Heat Shield 12-bolt differentials with 8.875" dia. ring gear,
MRG3678 spacer allows using lower gear ratio in higher series
Designed for popular small or big block Chevy applications using OEM-type differential carrier. Spacer is blanchard ground steel, .305"-.315" thick with
starters, shield enhances starter performance by preventing heat transfer .437" bolt hole diameter, and includes bolts.
from exhaust. Heat-resistant material is sandwiched between two aluminum
plates. Differential Gaskets
MRG81
Part No. Application
Hot Start Kit MRG81 1957-64, Chrysler 8-3/4" Ring Gear
Designed to eliminate “hot start” MRG81A 1966-84, Dana 60,
1957-81, Ford, 9", Ring Gear
MRG82
problems caused by an overheated MRG84A 1965-72, GM 12-Bolt 8-7/8" Pass. Ring Gear
solenoid, “Hot Start Kit” relocates MRG84B 1965-72, GM 10-Bolt 8-1/2" Ring Gear
solenoid away from exhaust header heat. Kit MRG142 1981-2011, Ford 8.8" 10-Bolt MRG142
includes solenoid, wiring and necessary hardware.
Trunk-Mounted Battery Installation Kit
Part No. Description
MRG51340G Hot Start Kit MRG6279
MRG51341G Replacement Solenoid Only Improve traction by relocating the battery to the
trunk. Battery box is 12" L x 6-3/4" W x 10"
Coil Spring Spacers
H and made of molded polyethylene. Kit also
Raise coil-spring equipped cars 1" (fit above or below coil). Super coil spring includes hold-down brackets, 20 ft. of 4-gauge
spacer has dual grooves for easier insertion and improved retention of spring. stranded copper battery cable, (4) terminal ends,
Part No. Description (2) battery cable ends, and installation hardware.
MRG1285 Coil Spring Spacer, “U” Cross Section, Installs Above or Below Spring Accommodates batteries up to 12" in length.
MRG1287 Super Coil Spring Spacer, “H” Cross Section, Installs Into The Coil

494