Page 686 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Air-To-Air Intercooler Manual Bead Roller
Air-to-air intercoolers are VIB2990
fully capable of handling the Bead Roller allows manually rolling beads in multiple
most extreme race car ap- stages by tightening rollers gradually. Minimum tube
plications. Intercooler utilizes diameter to be used is 3/4” OD. Bead roller is intended for
bar-and-plate construction, use on aluminum material only.
which is far superior to traditional tube and fin units. Intercooler delivers a
cooler, denser air charge, resulting in reduced chance of detonation while Manual Boost Controller
maximizing turbocharger efficiency. VIB16901
Part No. Description Manual Boost Controller features a large,
VIB12800 Air-To-Air Intercooler, Up To 350 HP, 26" W x 6-1/2" H x 3-1/4" D
VIB12810 Air-To-Air Intercooler, Up To 550 HP, 30" W x 9-1/4" H x 3-1/4" D premium-grade brass adjustment knob to
allow increase or decrease boost pressure
Intercooler Cores NEW! accurately and effectively. An integrated low-
Designed for the do-it-yourselfer pressure check valve helps prevent stalling on
that desires to fabricate their MAF-equipped cars. Constructed from billet
own custom intercooler. Manu- 6061-T6 aluminum with black anodized finish,
factured from premium 6061 controller is sold complete with mounting bracket.
aluminum featuring bar-and-plate
construction. Universal Catch Cans
Part No. Dimensions HP Rating Universal catch cans are 4” in diameter and 8” tall, and
Horizontal Flow Intercooler Cores include internal baffling for effective fluid control, dip stick
VIB12830 17-3/4" W x 6-1/2" H x 3-1/4" D 350 for fluid level checks, a recessed stainless steel filter, and
VIB12831 22" W x 9" H x 3-1/4" D 550 bottom -8AN plug for draining or return feed to oil pan.
VIB12832 25" W x 11-7/8" H x 3-1/2" D 875
VIB12833 17-3/4" W x 9-7/8" H x 3-1/2" D 515 Included stainless mounting bracket may be clocked for de-
VIB12834 17-3/4" W x 11-7/8" H x 4-1/2" D 750 sired mounting position. Offered with black anodized finish.
VIB12835 20" W x 11" H x 3-1/2" D 600 Black
VIB12836 22" W x 5-7/8" H x 3-1/2" D 400 Part No. Description
VIB12837 22" W x 9-7/8" H x 4" D 750 VIB12695 Catch Can With (2) -10AN Fittings
VIB12697
Catch Can With (4) -10AN Fittings
VIB12838 22" W x 11-7/8" H x 4-1/2" D 900
VIB12839 24" W x 8" H x 3-1/2" D 600 Vacuum Manifold
VIB12840 27-1/2" W x 9-7/8" H x 4-1/2" D 900
VIB12841 11-7/8" W x 6" H x 3" D 200 Manifold allows gathering vacuum
VIB12844 18" H x 12" W x 6" D 1,300 from a single source and distributing
Vertical Flow Intercooler Cores it to several outlet ports such as a
VIB12850 12" H x 12" W x 3-1/2" D 350 boost gauge, boost controller, blow-off valves, fuel pressure regulator, etc.
VIB12851 30" H x 10" W x 3-1/2" D 850 Billet aluminum block is 5-1/2” long x 1-1/2” tall x 1” thick and includes
VIB12852 27" H x 6" W x 4-1/2" D 900
VIB12853 22" H x 14" W x 4-1/2" D 975 (6) 1/8” NPT threaded ports and (1) 3/8” NPT theaded port. Offered
VIB12854 30" H x 12" W x 4-1/2" D 1,050 with silver or black anodized finish.
VIB12855 18" H x 6" W x 3-1/2" D 375 Silver Black
VIB12856 24" H x 6" W x 3-1/2" D 550 Part No. Part No.
VIB12857 12" H x 8" W x 3-1/2" D 225 VIB2690 VIB2691
VIB12859 24" H x 8" W x 3-1/2" D 625
VIB12862 18" H x 12" W x 6" D 1,200
VIB12866 22" H x 11" W x 6" D 1,300

Vacuum Line Fittings NEW!

VIB2896
VIB12890
Part No. Description
VIB12890 Soft Mount Vacuum Line Fitting, Installs Into Silicone Connector
VIB2895 Vacuum Line Fitting, 10mm OD, For Intake Tubes
VIB2896 Vacuum Line Fitting, 16mm OD, For Intake Tubes
Photo by: Ashley Kindle Mike Lapp

685