Page 708 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Rear Axle Disc Brake Kits Heavy-Duty Pro Series Rear Axle Disc Brake Kits
Kits reduce weight by up to 35 lbs. and dramati- The superior clamping force of billet Dynalite
cally improve braking power on any drag or pro four-piston calipers combined with vented iron
street car. Bolt-on kits include high-torque, four- alloy competition rotors provides braking power
piston billet Dynalite calipers, lightweight drilled for heavy drag cars. Each kit includes calipers, ro-
steel rotors, aluminum mounting hats, brake pads, tors, aluminum brake hats, brake pads, aluminum
caliper brackets, and all installation hardware. See caliper brackets, and hardware. See the diagram
accompanying diagram to determine proper brake offset. below to determine proper application and offset.
Part No. Description Standard Kit With
WIL140-0260-BD 8-3/4" Chrysler; Dana 60, Green Bearing, 2.36" Offset Description Kit †† Drilled Rotors ††
WIL140-0261-BD Big Bearing Ford, 2.36" Offset 12-Bolt Chevy, Stock C-Clip Only, 2.91" Offset WIL140-2112-B WIL140-2112-BD
WIL140-2113-B
WIL140-0262-BD Small Bearing Ford, 2.66" Offset Small Bearing Ford 9", 2.66" Offset WIL140-2114-B WIL140-2113-BD
Big Bearing Ford 9", 2.54" Offset
—
WIL140-0264-BD Olds/Pontiac, 2.91" Offset Big Bearing Ford 9", 2.36" Offset WIL140-2115-B WIL140-2115-BD
WIL140-2119-BD Big Bearing Ford, New Style, 2.50" Offset Mopar/Dana, Green Bearing Only, 2.72" Offset WIL140-2116-B —
WIL140-3623-BD Big Bearing Ford 9", New Style, 2.50" Offset Mopar/Dana, Green Bearing Only, 2.36" Offset WIL140-2117-B —
WIL140-4545-BD 12-Bolt Chevy, C-Clip Eliminator, 2.91" Offset Big Bearing Ford 9", New Style, 2.50" Offset WIL140-2118-B WIL140-2118-BD
WIL140-5255-BD 8-3/4" Chrysler, Dana 60, Green Bearing/Snap Ring, 2.36" Offset Ford Mustang 8.8" W/O ABS, 5-Lug, 2.50" Offset WIL140-3018-B —
12-Bolt Chevy, C-Clip Eliminator, 2.91" Offset WIL140-5236-B †† WIL140-5236-BD ††
†† Also fits some GM 10-bolt rear housings found in other GM cars. Kit will not fit large bear-
ing housings used in full size GM cars or trucks.
REAR DISC BRAKE INFORMATION Housing Flange Chart, Diagram A

To order the proper Wilwood rear disc brake kit, check the following mea-
sure ments on rear end as sem bly and refer to the accompanying diagrams
to determine the exact housing flange and axle flange-to-housing flange
di men sions.
1. Outside bearing diameter (Diagram A).
2. Housing flange mounting pattern (Diagram A).
3. Stud pattern and bolt circle on axle flange.
4. Determining Axle Offset - Ford 9" and Dana rear axles, in particular, have
used varying axle to housing flange offsets over the years. This is the
reason it is very important that this measurement is accurate when ordering
rear disc brake kits for these applications. Use the drawing in the lower
middle of Diagram A to correctly measure this dimension.
Very Important: Custom-built or narrowed rear end housing may be equipped with a dif-
ferent make or style of hous ing flange. Be sure to order the mounting kit to fit the housing
Diagram A flange, not necessarily the make of the rear end. Example: Big Ford housing with Olds flange
requires an Olds/Pontiac Disc Brake Kit.

Forged Billet Dynalite Calipers Dynalite Single Floater Caliper
The base model of Wilwood’s bolt-on disc Single-piston, low-profile billet aluminum caliper fits in
brake kits. Extensive testing has shown that tight locations where opposed piston caliper may not.
the strength of forged billet yields a more efficient Black anodized caliper weighs just 1.4 lbs.
caliper requiring less pedal travel. SRS stainless steel bridge Piston Rotor Square Ring Kit Bleed Screw Kit Cotter Pin
plates prevent wear and pad rattle. May be mounted in front, rear, right, or Part No. Dia. Thk. 4-Pc. 4-Pc. 10-Pc.
left position. WIL120-3277 1.75" .38" WIL130-2655 WIL220-0627 WIL180-0054
Piston Rotor Bleed Screw Square Ring Body
Part No. Dia. Thk. Kit 4-Pc. Kit 4-Pc. Seal Billet Spot Caliper
WIL120-6804 1.38" 1.25" WIL220-0627 WIL130-2658 WIL210-2582 Single 1.75" piston billet spot caliper is for light duty.
WIL120-6805 1.38" 1.00" WIL220-0627 WIL130-2658 WIL210-2582 Floating, 1.2 lbs. black anodized caliper holds a round,
WIL120-6806 1.38" .810" WIL220-0627 WIL130-2658 WIL210-2582
WIL120-6808 1.38" .380" WIL220-0627 WIL130-2658 WIL210-2582 .25" thick, .7 cubic inch brake pad and accommodates
WIL120-6811 1.62" .810" WIL220-0627 WIL130-4346 WIL210-2582 rotors from 6.00" to 13.00" diameter and widths begin-
WIL120-6814 1.75" 1.25" WIL220-0627 WIL130-2655 WIL210-2582 ning at .12".
WIL120-6815 1.75" 1.00" WIL220-0627 WIL130-2655 WIL210-2582
O-Ring
WIL120-6816 1.75" .810" WIL220-0627 WIL130-2655 WIL210-2582 Part No. Piston Rotor Kit 4-Pc. Bleed Screw Kit Pad Retainer
Screw (Ea.)
4-Pc.
Dia.
Thk.
WIL120-6818 1.75" .380" WIL220-0627 WIL130-2655 WIL210-2582
WIL120-1064 1.75" .12"-.38" WIL130-0047 WIL220-0627 WIL230-1112
707