Page 123 - 2019 Allstar Performance Parts and Equipment Catalog

Clutch Line Kits Dirt Race Car Brake Line Kit
Designed to connect clutch Kit allows braided lines to be run throughout a
master cylinder to hydraulic dirt race car. Includes all lines
throw-out bearing or directly needed to reach from the FITTINGS & HOSES
to transmissions with internal calipers to inside the foot box. Due to
clutches. Pre-assembled brand preference and location of
braided steel hose assemblies pedals, master cylinders and
have #3 lines and are fitted with brake shut off, the specific
one -3AN straight end and one 3/16" fittings and lines to complete
inverted flare 90 degree hard line end. Also includes one plumbing inside the foot box
1/8" male to -3AN fitting (ALL50000). area will need to be purchased separately.
ALL46100-24 ....Kit With 24" Line Concerned about brake
ALL46100-36 ....Kit With 36" Line pressure? This kit uses #3 line size for stiffer pedal feel
ALL46100-48 ...Kit With 48" Line
while utilizing the more popular -4AN ends.
ALL42052 ..... Kit For Dirt Modifieds With OEM Calipers
Universal Clutch Line Kit ALL46101-36
ALL42053 ..... Kit For Dirt Modifieds With Aftermarket Calipers
Universal kit includes a variety of ALL42054 ..... Kit For Dirt Late Models With Aftermarket Calipers
fittings to connect most master
cylinders to a hydraulic slave Rear End Brake Line Kit
cylinder, throw-out bearing (Single Line Drop)
or to an internal clutch
transmission including Kit is designed to eliminate
Bert and Brinn style “hanging” brake lines near the
transmissions. Kit includes an 8" rear calipers. Rear brake line kits utilize a single line drop
long 3/16" hard line, one each of located near the left side of the center section. From the drop,
straight and 90 degree male 1/8"NPT to 3/16" inverted the lines tee and run over the top backside of the center sec-
flare fittings, one straight female 1/8"NPT to 3/16" tion, then across the backside of axle tubes to the calipers. Kit
inverted flare fitting, two straight male 1/8"NPT to -4AN includes braided lines (#3 line with -4AN ends), -4AN tee, 3"
hose fittings, a 36" #4 braided steel hose with -4 straight axle tube clamp bracket and a tee bracket.
fittings and line clamps for the steel and braided line. ALL42056 ... Kit For Dirt Modifieds (60" Wide) With OEM Calipers
ALL42057 ... Kit For Dirt Modifieds (60" Wide) W/Aftermarket Calipers
ALL42058 ... Kit For Dirt Late Models (62" Wide) W/Aftermarket Calipers
Brake Hose Kits
Kits include everything necessary to complete the con- Front End Brake Line Kit
nection between a 3/16" steel brake line and the brake
caliper, including two 15" steel braided hoses. Designed Kits include braided lines to reach from
to fit calipers with 10mm x 1.50 threads (ALL42083/ the front calipers to inside the foot
ALL42084) or 7/16" x -20 threads box. Braided lines are #3 size with
(ALL42081/ALL42082). -4AN ends. The #3 line size offers
a stiffer pedal feel while utilizing
Kit Components: the more popular -4AN ends.
• Two 15" Hoses With -3AN Ends ALL42060 ..... Kit For Dirt Modifieds With OEM Calipers
• Two Banjo Bolts ALL42061 ..... Kit For Dirt Modifieds With Aftermarket Calipers
• Four Crush Washers ALL42062 ..... Kit For Dirt Late Model With Aftermarket Calipers
• Two Brake Line Clips
Note: Visit our website for specific components used in these kits!
• Two -3AN To 3/16" Steel Brake Line Adapters
• Two -3AN Banjo Fittings Gauge Line Kits
• Two Brake Line Tabs
ALL42025 ..... GM Metric Kit With 10mm-1.50" Bolts Gauge line kits provide easy con-
ALL42027 ..... Big GM Kit With 7/16"-20 Bolts nection to most mechanical oil and
fuel pressure gauges. Includes a
D.O.T. Legal pre-assembled length of #4 braided
Brake Hose Kits steel line with -4AN ends and male
and female 1/8"NPT adapters to work
Kits include two 16" long with most applications.
#3 stainless steel braided
lines with banjo fittings attached, ALL46110-36 ....... Kit With 36" Line
banjo bolts, crush washers, frame adapter ALL46110-48 ....... Kit With 48" Line
ALL46110-60 ....... Kit With 60" Line
fittings, frame tabs and holding clips.
ALL46110-72 ....... Kit With 72" Line
ALL42032 ..... GM Metric Kit With 10mm-1.50 Bolts
ALL42033 ..... Big GM Kit With 7/16"-20 Bolts

www.allstarperformance.com 121