Page 346 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

ENDURO RACING CELLS FUEL CELL ACCESSORIES
Cell includes steel container, POWDER COATED
FIA-FT3, DIRT and SCCA STEEL CONTAINERS
approved polymer bladder, Part No. Description
full foam baffling, standard fill Fits
plate with 2-1/2" threaded cap FUESC115 PC115/SM115 Bladders
and roll-over valve, internal fuel Fits PC122A/SM122A
strainer and dual, -8AN fuel pick-up. FUESC122A Bladders
Bladder is covered by a 2 year warranty. Fits PC122B/SM122B
Compatible with alcohol if foam is removed. FUESC122B Bladders
Part No. Volume Length Width Height
FUEED105 5 Gal. 13-5/8" 13-5/8" 8-3/8" ROLL OVER VALVE FUERV38
FUEED108 8 Gal. 20-3/4" 16" 7-3/4" In-line roll over/vent valve fits 3/8" hose.
FUEED112 12 Gal. 20-3/4" 17-7/8" 9-1/2"
FUEED115 15 Gal. 26" 17-7/8" 9-1/2"
FUEED122B 22 Gal. 25-1/2" 17-1/8" 13-3/4" CHECK VALVES
FUEED125 25 Gal. 26-1/4" 17-7/8" 14-1/2" Valves act as a vent and offer positive shut-off in the event
FUEED132A 32 Gal. 34-1/2" 17-7/8" 14-5/8" of a roll-over.
Part No. Description
DIRT SERIES RACING CELLS FUEILVV08 -8AN/1/2" In-Line Vent/Check Valve, Mounts In-Line
Engineered for dirt late model or dirt FUEITVV08S -8AN/1/2" In-Tank Vent/Check Valve, Mounts In Fill Plate
modifieds, Enduro cell uses a bladder
manufactured from high strength, DISCRIMINATOR VALVES
molded rubber that is compatible
with all hydrocarbon fuels, E85 blends Discriminates between gas and air.
and alcohol. Cell is sold completely Part No. Description
assembled with black powder coated 20 FUEDV100 1" Discriminator Valve
gauge steel container with external mounting With -12AN Fittings, External Mount
-8AN In-Tank Discriminator Valve,
flange, 6" x 10" powder coated fill plate with FUEITDV08 Bulkhead/Plate Mount
-10 outlet and 2-1/2" screw-on fill cap, fuel pickup
assembly plumbed to the right rear, aircraft aluminum
nut ring, dipstick and required hardware.
Part No. Volume Length Width Height
FUEED115-LM 15 Gal. 17.87" 26" 9.5"
FUEED122B-LM 22 Gal. 17.12" 25.50" 13.75" MULTI LOCATION
6" x 10" FILL PLATES
DIRT LATE MODEL/ Plates are for use with fill valves (below).
MODIFIED RACING CELLS Part No. Description
Specialized, Dirt Late Model/Modi- FUEML6X10A 1/2" (-8) Pickup And
fied fuel cells combine the benefits of 1/2" Vent Check Valve
safety, performance and affordability. FUEML6X10B 1/2" (-8) Pickup And 1" Vent Valve
Fully assembled cells incorporate an
Enduro molded bladder, black powder
coated 20 gauge steel container, light- STANDARD 6" x 10"
weight aluminum fill plate with threaded FUEDS117-T FILL PLATE FUESF6X10A
aluminum fill cap, dipstick, -6AN rollover vent valve, -8AN fuel return, -10AN Plate is complete with 2-1/2" threaded filler cap.
pickup with top outlet and hardware. Purchase mounting straps separately.
Fuel Cell
Part No. Volume Length Width Height Foam
FUEDS117-T 17 Gal. 23.5" 20" 14" None REMOTE 2-1/4" 45° FILL VALVE
FUEDS122-T 22 Gal. 17.12" 25.50" 13.75" None
FUEDS128-T 28 Gal. 23.5" 20" 20" None FUEFV245A
FUEDS128-T-FB 28 Gal. 23.5" 20" 20" Included Remote Fill Valve fits 6" x 10" fill plates (above).

RELATED COMPONENTS
Part No. Description
Mounting Straps
FUE17DM-SB
For FUEDS117-T Or FUEDS122-T FUE17DM-SB
FUE28DLM-5 Mounting Straps For FUEDS128-T GASKETS
FUEFB217DM Foam Baffling For FUEDS117-T
FUEFB222DM Foam Baffling For FUEDS122-T Part No. Description
FUEFB228 Foam Baffling For FUEDS128-T FUE1GAS07 10-Bolt Round Gasket, 3.125" B.C.
FUE1GAS78 12-Bolt Round Gasket, 4-3/4" B.C.
FUE1GAS79 12-Bolt Round Gasket, 5-3/8" B.C.
FUE1GAS97 24-Bolt Oval Gasket, 6" x 10", Base Of Multi-Plate
FUE1GAS98 12-Bolt Oval Gasket, 4" x 6", Sprint Top Plate

345