Page 54 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

ELECTRICAL, GAUGES AND IGNITION

CHEVY COIL BRACKET ALL81326
DISTRIBUTOR HOLD DOWN Universal coil mount for standard size canister style
Aluminum hold-down keeps distributor secured at ignition coils up to 2-1/4", includes threaded cross bolt to
high RPM. Fits small or big block Chevy V8 and 90° Chevy V6. aid in mounting.
Stainless steel stud, nut and washer are included. Choose blue,
clear or red anodized. SPARK PLUG INDEX SHIMS
Description Blue Clear Red Stackable shims index spark plugs
Chevy Distributor Hold Down ALL27502 ALL27503 ALL27504 at 30° intervals up to 360° properly
positioning ground strap in cylinder
CHEVY DISTRIBUTOR/MAGNETO head for increased power and clear-
HOLD DOWN ALL27500 ance between spark plug and piston. Shims
Aluminum hold down fits most aftermarket are intended for use with 14mm flat seat
distributors and magnetos. An Allen head spark plugs only. Package of 24 shims contains
bolt prevents distributor from turning in the 12 silver 60°, 12 black 90°, detailed instructions and
clamp so distributor can be removed and reinstalled dial chart.
without resetting the timing. Fits all Chevy V8 except Part No. Description
348-409. Will not fit Mallory magnetos. ALL96505 14mm Flat Seat
ALL96506 14mm Flat Seat, Small O.D. (All Pro)
CD IGNITION COIL ALL81230
High output ignition coil is specifically designed for use SPARK PLUG BOOT SLEEVES
with capacitive discharge ignition systems. 40,000 volt Fiberglass braided sleeves are heat resistant to protect spark plug boots from
coil is recommended for use with Allstar Performance HP header heat. 7-1/2" long sleeves slide over a variety of boots.
series distributors. Sturdy, high impact housing is epoxy
filled to protect against vibration. Extruded aluminum Part No. Description
bracket eases mounting. Mounting hardware, anti- ALL34272 Natural, 8-Pack
vibration mounting pads, ring terminals and high ALL34273 Natural, 2-Pack
temperature silicone boot are included. ALL34274 Black, 8-Pack
ALL34275 Black, 2-Pack
HIGH OUTPUT COIL ALL81232
High output coil is specifically designed for use with SB CHEVY SPARK PLUG WIRE LOOM SET
the high output inductive storage ignition module ALL81340
found in Allstar Performance Street/Strip series
distributors. Delivering up to 40,000 volts, this coil
has a male secondary tower which offers superior
boot and terminal retention and brass primary
terminals for maximum conductivity. Includes
mounting hardware, ring terminals and high
temperature silicone boot. Polished aluminum spark plug wire loom fits wires up to 9.5mm. Includes
mounting hardware. Engines with center bolt style valve covers require
ALL81341 mounting kit. Package of 2.
Note: May not clear oil dipstick or exhaust manifolds on some later model
engines with “log” style manifolds.
CANISTER STYLE IGNITION COIL Part No. Description
ALL81234 Related Item ALL81341
45,000 high volt, oil filled coil for electronic breakerless ALL81341 Mounting Kit For
ignitions has low primary resistance and 112:1 turn ratio for im- Centerbolt Covers
proved throttle response and more power at higher rpms. Coil fits
all standard O.E.M. brackets or Allstar ALL81236 coil bracket.
SPARK PLUG WIRE
COIL MOUNTS SEPARATOR SET
Use this lightweight, anodized aluminum bracket to mount canister type igni- ALL81345
tion coil to chassis quickly and securely. Black plastic set will fit up to 9mm wires.
Includes two of each 2-, 3- and 4-hole separators.

ALL81324 SPARK PLUG WIRE RETAINER
ALL81350
ALL81322
Part No. Description No more melted plug wires from hot
ALL81320 Mount For 1-1/2" Tubing exhaust. These aluminum retainers will
ALL81322 Mount For 1-3/4" Tubing neatly mount separated 4-wire sets to the
ALL81324 Flat Mount front or rear of cylinder head. Package of 2.

53