Page 605 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

ROD END SEALS FIREWALL GROMMETS
Rod End Seals keep dirt and water out of rod Grommets may be fastened to firewall
ends for longer life and better per for mance. with rivets or screws to provide a leakproof
Excellent for use on dirt cars. Six per pack. passage for hoses or wires. Eliminate sharp
Part No. Description edges which cause electrical shorts or fluid
SICWS3750-6PK 3/8" Rod End Seals leakage.
SICWS5001-6PK 1/2" Rod End Seals Part No. Description
SICWS6250-6PK 5/8" Rod End Seals SICGS1003-4 3" Diameter, -4AN Hose
SICWS7500-6PK 3/4" Rod End Seals SICGS1003-6 3" Diameter, -6AN Hose
SICGS1003-8 3" Diameter, -8AN Hose
ROD END BOOTS SICGS1003-10 3" Diameter, -10AN Hose
SICRERS3-6PK SICGS1003-12 3" Diameter, -12AN Hose
SICGS1003-16
3" Diameter, -16AN Hose
Enclosed boots isolate rod ends from dirt, moisture SICGS1003-20 3" Diameter, -20AN Hose
and corrosion. Ideal for high misalignment applica- SICGS1003-BL 3" Diameter, Blank
tions. Rod end boots fit 1/2", 5/8" and 3/4" SAE, male or SICGS2003-5 1-1/2" Diameter, Blank
female rod ends. Six per pack. SICGS404-BL 4" Diameter, Blank
SICGS50238-BL 2" Diameter, Blank
ECONOMY AXLE SEALS SICGS101-NHBL Double Hole Grommet, (2) 3" Diameter, Blank
After extensive product development and testing, Seals POINTED FIREWALL GROMMETS
It introduces high quality, economically-priced axle seals Ideal for running throttle linkage, oil pressure lines, battery
that are designed for the Saturday night racer. Seals are cables, etc. Grommets include a pointed design and no hole.
extremely effective in keeping lubricant in the differential
Part No.
Description
and off of the brakes. Seals fit axle tubes with inside SICGS2003-5-WPT 1-1/2" Diameter, 9/16" Depth
diameters between 2-1/2" and 2-3/4". May be used at either end of both ends SICGS4001-WPT 2" Diameter, 1-1/2" Depth
of the axle tube.
Housing Axle Seal Fits Axle Pass Thru
Part No. I.D. I.D. O.D. Max
SICEAS15100 2.500"-2.750" 1.000" 1.300"-1.400" 1.850" SPLIT SEAL
SICEAS15125 2.500"-2.750" 1.250" 1.500"-1.600" 1.850" FIREWALL GROMMETS
SICEAS15132 2.500"-2.750" 1.320" 1.625"-1.750" 1.850" Use on permanent components or those that are not easily
SICEAS25100 2.125"-2.250" 1.000" 1.300"-1.400" 1.850" removed. Grommets are 3" dia. and may be riveted or bolted
SICEAS25125 2.125"-2.250" 1.250" 1.500"-1.600" 1.850" to firewall.
SICEAS25132 2.125"-2.250" 1.320" 1.625"-1.750" 1.850" Part No. Description
SICEAS25875 2.125"-2.250" .875" 1.000"-1.250" 1.850" SICSGS3-5-.500 1/2" Hole
SICEAS35100* 1.900"-2.000" 1.000" 1.300"-1.400" 1.850" SICSGS3-5-.750 3/4" Hole
SICEAS35125* 1.900"-2.000" 1.250" 1.500"-1.600" 1.850" SICSGS3-5-1.00 1" Hole
SICEAS35875* 1.900"-2.000" .875" 1.000"-1.250" 1.850" SICSGS3-5-BL No Hole
* Will also work as a 2.5" GN inner axle snout seal.
GM “G"-BODY TRAILING ARM BUSHING
FORD 9" INNER AXLE SEAL SICGBTA1-09
Bellows style seals adjust for axle runout. Designed exclusively for 1973-up GM “G”-body ap-
A must for cambered rear ends. plications, innovative new bushing offers the handling
Part No. O.D. Size Color and performance characteristics of a monoball insert
SICAS9250 2.500" Gold in a legal, elastomer design. Bushing has an alloy steel
SICAS9218 2.562" Blue housing with inner elastomer bearing that is bonded and
SICAS9188* 2.625" Red molded. Sold individually.
SICAS9125 2.750" Silver
* Most common
Part No. Description FUEL PUMP SEAL
Replacement Components AND INSULATOR
SICAS1000-NP Inner Axle Seal
O-Ring Kit, Seals stop oil leakage and prevent hot
SICAS9188OR-3
2.625" O.D. Seal engine oil from heat ing fuel. Special gasket and sleeved
bolts in su late pump body.
WIDE 5 HUB SEAL SICCHFP4002-H SB Chevy, Fits Holley Pumps
Part No.
Description
SICHS2001 SICCHFP4002-C SB Chevy, Fits Carter Pumps
Seals-It Wide 5 Hub Seal fits all wide 5 hubs to SICSFP-105 SB Chevy, Fits Race Pumps
keep rear end lube out of the hub
GAUGE ISOLATORS
Use between gauge and dash or gauge panel to
WIDE 5 OUTER HUB SEAL dampen vibration.
SICOS3001 Part No. Description
Keeps grease in and dirt and moisture out of SICDB206-225 2-1/16" Gauge Isolator
the wheel bearings. Seal has 3.130" O.D. and a SICDB260-275 2-5/8" Gauge Isolator
1.812" I.D.

604