Page 61 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

FASTENERS

BODY REINFORCING PLATES SPRINGS ALL19320
Plates help protect fiberglass and aluminum panels 10-Pack 50-Pack
from cracking when using 7/16" quick turn 1-3/8" (.090" Wire Diameter)
fasteners. Stainless steel plates are precision .325" Reach ALL19320 ALL19322
stamped with a strengthening border, attach with 1/8" rivets and measure 2" .375" Reach ALL19330 ALL19332
wide x 1" tall. .425" Reach ALL19336 ALL19338
1" (.080" Wire Diameter)
Part No. Description
ALL18985 10-Pack .250" Reach ALL19300 ALL19302
ALL19310
ALL19312
.325" Reach
ALL18985-50 50-Pack 3/4" (.062" Wire Diameter)
.200" Reach ALL19296 ALL19298
MOUNTING BRACKETS FOR
1" SPRINGS (.0625" THICK) QUICK TURN SPRING FIXTURE
Accurately drill panels when installing quick turn fastener
springs. Start with a 1/4" center hole and use the fixture to locate
and drill 1/8" holes for mounting the springs. Size listed is
spring center to center distance.
ALL19407
Part No. Description
ALL19364 ALL19340 ALL19406 Fixture For 3/4" Spring
Description 10-Pack 50-Pack ALL19407 Fixture For 1" Spring
Weld-on, Lightweight ALL19364 ALL19366 ALL19408 Fixture For 1-3/8" Spring
Weld-on Lightweight w/.250" Spring ALL19365 ALL19367
Weld-on ALL19340 ALL19342 PIN TYPE CLECO FASTENERS
Weld-on w/ALL19300 Spring ALL19350 ALL 19352
Cleco pins permit quick, easy installation and removal of sheet metal during
MOUNTING BRACKETS FOR fitting. Pins work with thicknesses up to 1/4".
1" AND 1-3/8" SPRINGS (.0625" THICK) Part No. Description Part No. Description
1/8" Dia. Pins 3/16" Dia. Pins
ALL18222 10-Pack ALL18226 10-Pack
ALL18223 25-Pack ALL18227 25-Pack
ALL18224 100-Pack ALL18228 100-Pack
ALL19360
ALL19380 ALL19384
Drill holes one drill size smaller than the Cleco pin size to assure a tight fit.

ALL19390 ALL19394 CLAMP TYPE CLECO FASTENER
ALL18230
Description 10-Pack 50-Pack A very strong spring clamp to hold pieces together
Weld-on, Lightweight when drilling is not an option. The smooth throat pre-
(For 1-3/8" Spring Only) ALL19360 ALL19362 vents paint damage and is 1" deep with a maximum clamping range
Weld-on, Lightweight w/.375" Spring ALL19361 ALL19363 of 1/2".
Weld-on LH ALL19380 ALL19382
Weld-on RH ALL19384 ALL19386
Rivet-on LH ALL19390 ALL19392
Rivet-on RH ALL19394 ALL19396

QUICK TURN FASTENER MEASUREMENT GUIDELINES
To find (A) Fastener Length, add together (B) Spring Reach and (C) Material Thickness (including bracket if applicable). A=B+C
QUICK TURN FASTENER SELECTION
• Determine the total thickness of the panels being joined including mounting brackets and the space between the panels, if any.
• Select the proper body length and spring height combination which provides the proper thickness range.

Part No. & (B) (A) .400" .450" .500" .550" .600"
1" Springs (C) Total Material Thickness Range
ALL19300 .250" .165"-.200" .215"-.250" .265"-.300" .315"-.350" .365"-.400"
ALL19310 .325" .098"-.133" .148"-.183" .198"-.233" .248"-.283" .348"-.383"
1-3/8" Springs (C) Total Material Thickness Range
ALL19320 .325" .105"-.148" .155"-.198" .205"-.248" .255"-.298" .355"-.398"
ALL19330 .375" .055"-.098" .105"-.148" .155"-.198" .205"-.248" .305"-.348"
ALL19336 .425" .005"-.048" .055"-.098" .105"-.148" .155"-.198" .255"-.298"

60