Page 629 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

FABRICATED SPINDLES ALUMINUM TORQUE ABSORBER
Spindles are designed, hand-fabricated and welded SWE501-60040
by Sweet craftsmen for use on a wide range of race Lightweight, durable billet
cars. aluminum torque absorber
LH RH may be used in the top link, right
Description Part No. Part No. rear trailing arm or Panhard bar to increase
Late Model Dirt, 8 Degree forward bite and promote improved traction.
Wide 5 Hub, SWE701-118-121 SWE701-118-122
Superlite 11.75" Rotor
Chevy 8-1/2", 10 Degree ALUMINUM PANHARD BAR CLEVIS
Wide 5 Hub, GM/Howe SWE701-121-113* SWE701-121-112 SWE501-60010
11.75" Rotor, Adjustable
Wide 5 Hub, Superlite SWE701-121-123* SWE701-121-122 Clamps around a 1-3/4" chassis tube for easy
11.75" Rotor Panhard bar adjustment.
Wide 5 Hub, Superlite SWE701-121-
11.75" Rotor, +1/2" Height SWE701-121-123+1/2* 122+1/2
Howe/PCR 5X5 Hub,
GM/Howe 11.75" Rotor SWE701-121-213* SWE701-121-212
Howe/PCR 5X5 Hub, HEAVY DUTY PANHARD BAR
Superlite 11.75" Rotor SWE701-121-223* SWE701-121-222 SWE501-60012
Chevy 8-1/2", 5 Degree Provides a “straight off center” pull for decreased
Wide 5 Hub, – SWE701-148-132 load effect compared to a J-Bar. Allows easy
Dynalite 11.75" Rotor access for rear roll center adjustment. Super
Ford 7-3/4", 7 Degree strong billet aluminum bar weighs just 4
Wide 5 Hub, – SWE701-150-122 pounds. Compatible with Sweet clevis brackets.
Superlite 11.75" Rotor
Ford 7-3/4", 10 Degree
Wide 5 Hub,
Superlite 11.75" Rotor, SWE701-120-123+1/2* –
+1/2" Height PANHARD BAR BRACKET
Howe/PCR 5X5 Hub, – SWE701-120-222
Superlite 11.75" Rotor Single side serrated Panhard bar bracket
Figure 8 attaches to the front of a quick change rear end
Wide 5 Hub, to accept a SWE501-60012 Panhard bar or a J-Bar
Superlite 11.75" Rotor SWE701-119-121 SWE701-119-122 style Panhard bar. Machined from high quality alumi-
Wide 5 Hub, Dynalite SWE701-119-131 SWE701-119-132 num billet, bracket is red-anodized for appearance and
Notes: Ford spindles measure 7.75" from top to bottom, Chevy spindles protection from corrosion. Seal and O-ring are included.
are 8.5". The distance is the same on both designs from bottom to pin Part No. Description
centerline. SWE501-60034 Serrated Panhard Bar Bracket
* Signifies adjustable.
SWE501-60016 Replacement O-Ring
SWE501-60017 Replacement Seal
ACKERMANN
ADJUSTER BLOCK
Ackermann Adjuster controls the turning
radius, keeping the right front wheel in proper
relation to the left front wheel.
Part No. Description TOP LINK BRACKETS
SWE701-100-101 Adjustable Block And Washer SWE501-60050
SWE701-100-102 Block Only Brackets have a 3/4" slot for easy adjustment
SWE701-100-103 Washer Only and 3" setback. Sold as a pair.

ALUMINUM CARB COVER
SWE901-10008
Cover will keep dirt and debris out of an engine during
storage.
ALUMINUM
AIR CLEANER STUD TRAILING ARM BRACKET
AND O-RING CARB NUT SWE501-60007
Part No. Description Clamps to a 3" diameter axle tube. Fits right or left
Air Cleaner Stud, hand and weighs just 3 lbs. Sold individually.
SWE901-10150
4130 Steel, 5/16"-18
O-Ring Carb Nut,
SWE901-10151
Aluminum, 5/16"-18

628