Page 653 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

WIDE 5 DUST COVER GM METRIC OFFSET
Part No. Color UPPER CONTROL ARMS
UBM10-0601 Blue Offset control arms for stock GM 1978-88 metric
UBM10-0602 Gold chassis have inner shafts with 6-7/8" spacing.
UBM10-0603 Red
Part No. Description
8" Left Side, 1-1/4" Offset,
UBM14-0809-5L Accepts Metric (ALL56220) Ball Joint
BRAKE FLOATER BRACKETS UBM14-0809-5R 8" Right Side, 1-1/4" Offset,
All steel brackets slide over 3" diameter steel tube Accepts Metric (ALL56220) Ball Joint
without nylon liner. UBM14-0809-6L 8" Left Side, 1-1/2" Offset,
Part No. Description Accepts Metric (ALL56220) Ball Joint
8-1/2" Left Side, 1-1/2" Offset,
LH Brake Floater - UBM14-0829-6L
UBM12-0450-L Accepts Metric (ALL56220) Ball Joint
GM Metric Caliper 9" Left Side, 1-1/2" Offset,
RH Brake Floater - UBM14-0909-6L
UBM12-0450-R Accepts Metric (ALL56220) Ball Joint
GM Metric Caliper UBM14-0929-6L 9-1/2" Left Side, 1-1/2" Offset, Accepts Bolt-In Ball Joint
UBM46-0135 Retainer Clamp, 3-1/4" O.D. 7" Right Side, Pierce Chassis, 1-1/4" Offset,
UBM15-0709-5
Accepts Big GM (ALL56208) Ball Joint
9-7/8" Left Side, Pierce Chassis, 1-1/2" Offset,
UBM15-093-1/8-9-6L
Accepts Big GM (ALL56208) Ball Joint
8" Right Side, 1-1/4" Offset,
BRAKE CALIPER BRACKETS UBM15-0809-5R Accepts Bolt-In (ALL56204) Ball Joint
UB has a full selection of weld-on, clamp-on and 8-1/2" Left Side, 1-1/2" Offset,
bolt-on caliper brackets that are compatible with most UBM15-0829-6L Accepts Bolt-In (ALL56204) Ball Joint
brake calipers. All brackets are custom fabricated by UBM19-0829-6L 8-1/2" Left Side, 1-1/2" Offset,
UB technicians. Accepts Screw-In (ALL56214) Ball Joint
Hole Caliper
Part No. Type Spacing Type “15” SERIES OFFSET
Rear Clamp-On, UPPER CONTROL ARMS
UBM12-0400-C N/A GM Metric
3" Axle Tube
Rear Weld-On, Upper control arms have an 1-1/4" offset. The steel
UBM12-0401 N/A GM Large inner shaft has 6" hole spacing. Only accepts bolt-in
3" Axle Tube
Rear Clamp-On, ball joint (Allstar ALL56204).
UBM12-0403 N/A GM Large
3" Axle Tube Length Left Right
Pinto Spindle 8-3/4" UBM15-0834-5L UBM15-0834-5R
UBM12-0404R 5-1/2" GM Metric - Right Side 9-1/2" UBM15-0924-5L UBM15-0924-5R
Bolt-On
Pinto Spindle
UBM12-0404L 5-1/2" GM Metric - Left Side
Bolt-On
UBM12-0405-L GM Caliper/Pinto N/A GM Large, LF “15” /“19” SERIES
Spindle/11" Rotor UPPER CON TROL ARMS
GM Caliper/Pinto
UBM12-0405-R N/A GM Large, RF Stan dard upper control arms have either aluminum
Spindle/11" Rotor or steel inner shafts with 6" hole spacing. Bolt-in
Wilwood Dynalite,
UBM12-0410 Rear Weld-On 5-1/4" style accepts ALL56204 Allstar ball joint. Threaded style
Sierra Mini G.N.
Wilwood Dynalite, accepts ALL56214 Allstar ball joint.
UBM12-0412 Rear Clamp-On 5-1/4" Sierra Mini G.N. Bolt-In Ball Joint Screw-In Ball Joint
Wilwood Superlite, Length Aluminum Shaft Steel Shaft Aluminum Shaft Steel Shaft
UBM12-0420 Rear Weld-On 3-1/2" 6-3/4" – – – UBM19-0634
Sierra XL 7" UBM15-0700 – UBM19-0700 UBM19-0704
Wilwood Superlite,
UBM12-0422 Rear Clamp-On 3-1/2" 7-1/4" UBM15-0710 – UBM19-0710 UBM19-0714
Sierra XL 7-1/2" UBM15-0720 UBM15-0724 UBM19-0720 UBM19-0724
UBM12-0424L Front Spindle 3-1/2" Wilwood Superlite, 7-3/4" UBM15-0730 UBM15-0734 UBM19-0730 UBM19-0734
Weld-On Sierra XL 8" UBM15-0800 UBM15-0804 UBM19-0800 UBM19-0804
Front Spindle Wilwood Superlite, 8-1/4" UBM15-0810 UBM15-0814 UBM19-0810 UBM19-0814
UBM12-0424R 3-1/2"
Weld-On Sierra XL 8-1/2" UBM15-0820 UBM15-0824 UBM19-0820 UBM19-0824
8-3/4" UBM15-0830 UBM15-0834 UBM19-0830 UBM19-0834
“15” SERIES “WSP” 9" UBM15-0900 UBM15-0904 UBM19-0900 UBM19-0904
UPPER CONTROL ARMS 9-1/4" UBM15-0910 UBM15-0914 UBM19-0910 UBM19-0914
9-1/2"
UBM15-0920
UBM19-0924
UBM19-0920
UBM15-0924
“15” series “WSP” upper control arms include wide split 9-3/4" UBM15-0930 UBM15-0934 UBM19-0930 UBM19-0934
twin plates, which separate to allow mounting around 10" UBM15-1000 UBM15-1004 UBM19-1000 UBM19-1004
chassis. Control arms accept bolt-in style ball joints 10-1/2" – – UBM19-1020 UBM19-1024
and are offered with choice of steel or aluminum
inner shafts. “DIRT WORKS”
Aluminum Shaft Steel Shaft UPPER CONTROL ARMS
Length Part No. Part No.
10" UBM15-1000-WSP – Tubular control arms feature 6-1/2" long inner
10" UBM15-1001-WSP* – shafts, typical of Dirt Works and other chassis
10-1/2" UBM15-1020-WSP UBM15-1024-WSP using 1964-72 GM “A”-Body (Chevelle) frame.
11-1/4" UBM15-1110-WSP – Part No. Description
* Signifies control arm with slotted aluminum shaft. UBM19-0908-5R 9" Right Side, 1-1/4" Offset, Accepts Screw-In Ball Joint
UBM19-0928-5L 9-1/2" Left Side, 1-1/4" Offset, Accepts Screw-In Ball Joint
652