Page 666 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

OVER THE TOP FUEL BARREL SOCKET
PANHARD BAR WEHWM233
WEHWM220B Open steel 15, 30 and 55-gallon steel racing fuel drums with
The ultimate in adjustability and ease. Billet steel socket accepts a 1" wrench.
strength. Includes body only.
REAR END DRAIN PAN
WEHWM330
Q-JET ADAPTERS Fully fabricated aluminum drain pan has a
Precision machined, 1" tall adapters allow mount- provision to not only drain the rear end lube,
ing a Holley model 4412 500 CFM 2BBL carburetor but also a spot to secure the rear cover, cover
to a small block Chevy Quadrajet intake manifold. nuts and drain plug wrench. A built-in pour spout
Adapters are specially tapered, placing carburetor with drain valve eases draining or filling.
over rear throttle bores. Straight bore design is for
street stocks.
Part No. Description FOX SHOCK WRENCH
WEHWM10Q500 500 2BBL WEHWM321
WEHWM10Q500SB 500 2BBL, Straight Bore Wrench makes easy work out of rebuild-
ing Fox shocks.
AIR CLEANER NUTS
Super light nuts utilize an easy to grip design to allow
easy installation or removal without the need for a wrench
and are complete with an O-ring seal. BALL JOINT WRENCH
Part No. Description WEHWM260
WEHWM27250 1/4" Nut
Install screw-in ball joints quickly and easily. One end of
WEHWM273125 5/16" Nut the wrench fits upper screw-in ball joints, while the opposite
end fits lower screw-in ball joints.
BALL JOINT REMOVER WEHWM130-2
Tool adjusts from 5" to 7". Place between joint tips, apply pressure,
and tap spindle to remove the ball joint.
ROCKER ARM
SPLASH GUARDS
WEHWM42375
Splash guards offer increased valve train
GRAND NATIONAL HUB SOCKET longevity by directing oil from the pushrod
WEHWM265 down into the rocker balls and valve springs.
Designed small block Chevy with 3/8" rocker
Billet construction Grand National Hub Socket accepts a studs. Sold in pairs complete with hardware.
1/2" drive ratchet.
SB CHEVY EGR INTAKE BLOCKOFF
WEHWM232
Blockoff plate is required when eliminating EGR
WHEEL WELL COMPASS valve on small block Chevy intake manifold. Small
WEHWM295 rectangular design.
Tool, which installs directly into the axle after the cap is removed,
allows marking the desired radius around wheel wells prior to
trimming. Helps provide the desired cutting radius for a truly INTAKE DIVIDER WEHWM74
professional appearance.
Divider separates water flow from side to side,
improving cooling while reducing interference and back
pressure. Use with aluminum or iron small block Chevy
manifolds.

THERMOSTAT RISER WITH PORTS
INTERIOR Installs between the intake manifold and thermostat
TIN TUBE NOTCHER housing, allowing water lines to be routed to the
Notch interior tin quickly and easily. Available in rear of the intake, preventing vapor pockets from
1-1/4", 1-1/2" and 1-3/4". forming. Riser is 1" tall and is available with 1/4" or
Part No. Description 3/8" ports.
WEHWM2381250 1-1/4" Notcher Part No. Description
WEHWM238150 1-1/2" Notcher WEHWM39250 Thermostat Riser, (2) 1/4" Ports
WEHWM2381750 1-3/4" Notcher WEHWM39375 Thermostat Riser, (2) 3/8" Ports

665