Page 68 - 2017 Racecar Engineering Circle Track Parts and Accessories Catalog

FITTINGS AND HOSES

MASTER CYLINDER ADAPTER FITTINGS BULKHEAD FITTINGS
ALL41012 Black anodized aluminum bulkhead adapter fittings are perfect when plumb-
Fittings adapt master cylinders or combination valves with ing needs to pass through a firewall, interior panel or a mounting bracket.
1/2"-20 and 9/16"-18 ports to accept 3/16" inverted flare
brake line with standard 3/8"-24 fittings. Kit includes one of ALL50094 ALL50096
ALL50095
each fitting. ALL50097
ALL50092
3/16" NYLON BRAKE LINE ALL50093
COMPRESSION FITTINGS Part No. Description
ALL50092 Straight -3AN to -3AN
ALL50093 Straight -4AN to -4AN
ALL50094 90 Degree -3AN to -3AN
ALL50095 90 Degree 4AN to -4AN
ALL50096 Tee (Run) 3AN (3x)
ALL50097 Tee (Run) -4AN (3x)
ALL48032 ALL48033 ALL48034 ALL48035 ALL48036 ALL50098 -3AN Bulkhead Nut
Part No. Description ALL50099 -4AN Bulkhead Nut
ALL48032 1/8"-27 NPT Male To 3/16" Straight
ALL48033 1/8"-27 NPT Male To 3/16" 90 Degree DIRT RACE CAR BRAKE LINE KIT
ALL48034 3/16" Union Kit allows braided lines to be run throughout a dirt race car. Includes all lines
ALL48035 3/16" Tee, All Compression needed to reach from the calipers to inside the foot box. Due to brand prefer-
ALL48036 3/16" Captured End Caps, 10-Pack ence and location of pedals, master cylinders and brake shut off, the specific
fittings and lines to complete plumbing inside the foot box area will need to be
3/16" NYLON BRAKE LINE PUSH LOCK FITTINGS purchased separately.
Concerned about brake pressure? This kit uses #3 line with -4AN ends. The
#3 line size offers a stiffer pedal feel while utilizing the more popular -4AN
ends.

ALL48020 ALL48021 ALL48022 ALL48023
Part No. Description
ALL48020 1/8"-27 NPT Male To 3/16"
ALL48021 1/8"-27 NPT Female To 3/16"
ALL48022 3/16" Tee, All Push Lock
ALL48023 3/16" Tee, Two Pushlock And One 1/8"-27 NPT Male Part No. Description
ALL42052 Kit For Dirt Modifieds With OEM Calipers
TUBE NUTS ALL42053 Kit For Dirt Modifieds With Aftermarket Calipers
Tube nuts and sleeves are used when making ALL42054 Kit For Dirt Late Models With Aftermarket Calipers
hard line connections to male AN fittings. Line
requires a 37 degree flare for proper sealing. Sold REAR END BRAKE LINE KIT
in a pack of 4. ALL50300 ALL50310 (SINGLE LINE DROP)
Part No. Description Kit is designed to eliminate “hanging”
ALL50300 -3 Tube Nut brake lines near the rear calipers. Rear
ALL50310 -3 Tube Nut Sleeve Brake Line Kits utilize a single line drop
located near the left side of the center
90 DEGREE SWIVEL FITTING section. From the drop, the lines tee and
Black anodized aluminum fitting swivels a full 360 degrees run over the top back side of the center section, then across the backside of
for convenient hose connection. 1/8"NPT fitting is commonly axle tubes to the calipers. Kit includes braided lines (#3 line with -4AN ends),
used in aftermarket calipers, gauge panels or anywhere a -4AN tee, 3" axle tube clamp bracket and a tee bracket.
swivel connection would be useful. Part No. Description
Part No. Description ALL42056 Kit For Dirt Modifieds (60" Wide) With OEM Calipers
ALL50108 1/8" NPT to -3AN ALL42057 Kit For Dirt Modifieds (60" Wide) w/Aftermarket Calipers
ALL50109 1/8" NPT to -4AN ALL42058 Kit For Dirt Late Models (62" Wide) w/Aftermarket Calipers

AN UNION FITTINGS FRONT END BRAKE LINE KIT
Black anodized aluminum flare union adapter fittings are commonly used to Kits include braided lines to reach from the
connect two hoses with female AN ends. front calipers to inside the foot box. Braided lines are
Part No. Description #3 size with -4AN ends. The #3 line size offers a stiffer
ALL50090 -3AN to -3AN pedal feel while utilizing the more popular -4AN
ALL50091 -4AN to -4AN ends.
Part No. Description
BULKHEAD MOUNTING TAB ALL42060 Kit For Dirt Modifieds
With OEM Calipers
ALL60093 Kit For Dirt Modifieds
One piece steel mounting tab with 7/16" hole can be ALL42061 With Aftermarket Calipers
bolted to the chassis or rear end to hold bulkhead fittings ALL42062 Kit For Dirt Late Model
in place. Bracket is 5/64" thick. With Aftermarket Calipers
Note: Visit our website for specific components used in these kits!
67