Page 112 - 2020 Allstar Performance Parts and Equipment Catalog

FASTENERS Quick Turn 10-Pack 50-Pack Quick Turn Fastener

Insert Plates
Springs
ALL19320
Insert plate directly replaces
the quick turn spring, allowing panels to be bolted
1-3/8" (.090" Wire Diameter)
.325" Reach
ALL19330
.375" Reach
ALL19332
with limited access. Inserts have 1/4"-20 threads and are
.425" Reach ALL19320 ALL19322 together. May also be used as a blind nut on a panel
ALL19338
ALL19336
typically riveted to the backside of a panel or bracket with
1" (.080" Wire Diameter) 1/8" rivets.
.250" Reach ALL19300 ALL19302
.325" Reach ALL19310 ALL19312 ALL19420 ............ 1", 2-Pack
3/4" (.062" Wire Diameter) ALL19420-10 ....... 1", 10-Pack
ALL19420-50 ....... 1", 50-Pack
.200" Reach ALL19296 ALL19298
ALL19422 ............ 1-3/8", 2-Pack
ALL19422-10 ....... 1-3/8", 10-Pack
Quick Turn Spring Fixture
ALL19422-50 ....... 1-3/8", 50-Pack
Accurately drill panels when installing
quick turn fastener springs. Start with
a 1/4" center hole and use the fixture
to locate and drill 1/8" holes for mounting Threaded Insert Tool Kit
the springs. Size listed is spring center-to-center ALL19450
distance. Tool works with a cord-
ALL19407
ALL19406 ..... Fixture For 3/4" Spring less drill to install a
ALL19407 ..... Fixture For 1" Spring threaded insert into a
ALL19408 ..... Fixture For 1-3/8" Spring
panel or bracket. Inserts
are helpful when the backside of the panel is not easily
Quick Turn Spring Adjuster
accessible. Simply drill the correct size hole, install the
ALL19405 threaded insert onto the mandrel, then place the insert
This tool is a must when adjusting ten- into the hole and tighten using any cordless drill. Once
sion of quick turn springs. Simply turn the insert is compressed, reverse the drill and remove the
knob on adjuster to evenly pull or push mandrel from the insert. Kit includes mandrel and nose-
spring without kinking or breaking spring. piece for 1/4"-20, 5/16"-18 and 3/8"-16 inserts, other sizes
available separately. Threaded inserts sold separately.
Clamp-On Replacement Parts
Quick Turn Fastener Brackets ALL19452 ..... Mandrel and Nosepiece for 8-32
ALL19453 ..... Mandrel and Nosepiece for 10-24
These cool brackets allow you
to clamp a quick turn bracket ALL19454 ..... Mandrel and Nosepiece for 10-32
to round tubing. Allows a flush ALL19455 ..... Mandrel and Nosepiece for 1/4"-20
ALL19456 ..... Mandrel and Nosepiece for 5/16"-18
mount bracket behind a panel ALL19457 ..... Mandrel and Nosepiece for 3/8"-16 ALL19454
without grinding your powder
coat. Designed for use with 1-3/8" quick turn springs, Threaded Inserts
insert plates or threaded nut inserts. Black anodized.
Steel inserts are helpful when the
ALL19430 ..... 1" ALL19433 ...... 1-1/2" backside of the panel is not easily
ALL19431 ..... 1-1/4" ALL19434 ...... 1-5/8" accessible. Inserts work great for
ALL19432 ..... 1-3/8" ALL19435 ...... 1-3/4"
frequently removed items including gauge panels, switch
Related Components panels, access panels, and body panels,
ALL19330 ..... Quick Turn Spring 1-3/8" (Most Popular) or when mounting items to trailer walls.
ALL19422 ..... Quick Turn Insert Plate, 1/4"- 20 Thread Inserts are designed for installation using
ALL18547 ..... Threaded Nut Insert, Steel, 1/4"- 20 Thread insert tool ALL19450 with coordinating
ALL18548 ..... Threaded Nut Insert, Aluminum, 1/4"- 20 Thread
mandrel and nosepiece. Package of 10.
Thread Pilot Hole Grip Body Length
Part No. Size Size Range (Before Comp.)
ALL19460 8-32 17/64" Up To .080" .420"
ALL19330 ALL19422 ALL19448 ALL19447 ALL19461 10-24 5/16" Up To .130" .475"
ALL19462 10-32 5/16" Up To .130" .475"
ALL19463 1/4"-20 13/32" Up To .165" .580"
ALL19465 5/16"-18 7/32" Up To .150" .690"
ALL19467 3/8"-16 7/32" Up To .150" .690"

110 www.allstarperformance.com