Page 129 - 2020 Allstar Performance Parts and Equipment Catalog

Clutch Line Kits Dirt Race Car Brake Line Kit
Designed to connect clutch Kit allows braided lines to be run throughout a
master cylinder to hydraulic dirt race car. Includes all lines
throw-out bearing or directly needed to reach from the FITTINGS & HOSES
to transmissions with internal calipers to inside the foot box. Due to
clutches. Pre-assembled brand preference and location of
braided steel hose assemblies pedals, master cylinders and
have #3 lines and are fitted with brake shut off, the specific
one -3AN straight end and one 3/16" fittings and lines to complete
inverted flare 90° hard line end. Also includes one 1/8" plumbing inside the foot box
male to -3AN fitting (ALL50000). area will need to be purchased separately.
ALL46100-24 ....Kit With 24" Line Concerned about brake
ALL46100-36 ....Kit With 36" Line pressure? This kit uses #3 line size for stiffer pedal feel
ALL46100-48 ...Kit With 48" Line
while utilizing the more popular -4AN ends.
ALL42052 ..... Kit For Dirt Modifieds With OEM Calipers
Universal Clutch Line Kit ALL46101-36
ALL42053 ..... Kit For Dirt Modifieds With Aftermarket Calipers
Universal kit includes a variety of ALL42054 ..... Kit For Dirt Late Models With Aftermarket Calipers
fittings to connect most master
cylinders to a hydraulic slave Rear End Brake Line Kit
cylinder, throw-out bearing (Single Line Drop)
or to an internal clutch
transmission including Kit is designed to eliminate
Bert and Brinn style “hanging” brake lines near the
transmissions. Kit includes an 8" rear calipers. Rear brake line kits utilize a single line drop
long 3/16" hard line, one each of located near the left side of the center section. From the drop,
straight and 90° male 1/8"NPT to 3/16" inverted flare fit- the lines tee and run over the top backside of the center sec-
tings, one straight female 1/8"NPT to 3/16" inverted flare tion, then across the backside of axle tubes to the calipers. Kit
fitting, two straight male 1/8"NPT to -4AN hose fittings, a includes braided lines (#3 line with -4AN ends), -4AN tee, 3"
36" #4 braided steel hose with -4 straight fittings and line axle tube clamp bracket and a tee bracket.
clamps for the steel and braided line. ALL42056 ... Kit For Dirt Modifieds (60" Wide) With OEM Calipers
ALL42057 ... Kit For Dirt Modifieds (60" Wide) W/Aftermarket Calipers
ALL42058 ... Kit For Dirt Late Models (62" Wide) W/Aftermarket Calipers
D.O.T. Legal Front End Brake Line Kit
Brake Hose Kits Kits include braided lines to reach from
Kit includes everything neces- the front calipers to inside the foot
sary to complete the connection box. Braided lines are #3 size with
between 3/16" steel brake line and -4AN ends. The #3 line size offers
the brake caliper for one axle. Kits a stiffer pedal feel while utilizing
include two brake line adapter fittings, the more popular -4AN ends.
steel weld on tabs, retainer clips, banjo ALL42060 ..... Kit For Dirt Modifieds With OEM Calipers
caliper fittings, banjo bolts, crush washers, ALL42061 ..... Kit For Dirt Modifieds With Aftermarket Calipers
and 16" DOT approved #3 braided steel hoses. ALL42062 ..... Kit For Dirt Late Model With Aftermarket Calipers
ALL42032 ..... GM Metric Kit With 10mm-1.50 Caliper Bolts Note: Visit our website for specific components used in these kits!
ALL42033 ..... Big GM Kit With 7/16"-20 Caliper Bolts
Gauge Line Kits
Gauge line kits provide easy con-
Brake Hose Kits nection to most mechanical oil and
Kit includes everything fuel pressure gauges. Includes a
necessary to complete the pre-assembled length of #4 braided
connection between 3/16" steel line with -4AN ends and male
steel brake line and the brake and female 1/8"NPT adapters to work
caliper for one axle. Kits include two with most applications.
brake line adapter fittings, steel weld on tabs, ALL46110-36 ....... Kit With 36" Line
retainer clips, banjo caliper fittings, banjo ALL46110-48 ....... Kit With 48" Line
bolts, crush washers, and 15" #3 braided steel hoses. ALL46110-60 ....... Kit With 60" Line
ALL42025 ..... GM Metric Kit With 10mm-1.50 Caliper Bolts ALL46110-72 ....... Kit With 72" Line
ALL42027 ..... Big GM Kit With 7/16"-20 Caliper Bolts

www.allstarperformance.com 127