Page 15 - 2020 Allstar Performance Parts and Equipment Catalog

BODY

Step Drill Sets Aluminum Panels
Drill multiple size holes with one bit. Drill Universal panels have many uses around
sheet metal and aluminum without the shop or at the track. Panels work well
deforming or distorting. Bits start on when fabricating spoiler sides, interior panels or on uneven
contact, deburr and chamfer while pit areas as a floor jack plate. 24" x 48".
drilling and do not require a center ALL11041 ALL22236 ..... 0.063" Thick
punch. Titanium nitride coated high ALL22237 ..... 0.090" Thick
speed steel. 1/4" shank. ALL22238 ..... 0.125" Thick
Drill Bit Sizes
ALL11040 (3-Piece Set)
Six Step 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" Diamond Plate
Nine Step 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"
1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", Aluminum ALL22240
Thirteen Step
3/8", 13/32", 7/16", 15/32", 1/2" 4' x 8' sheets are .063" thick
ALL11041 (2-Piece Set) and provide an attractive, shiny,
1/4", 25/64", 35/64", 11/16", 13/16", 7/8", 1", 1-1/8", non-slip finish for trailer floors, Aluminum And Diamond Plate
Eleven Step
1-7/32", 1-1/4", 1-3/8" steps, etc. Shipped Freight Truck, Six
3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", Sheet Minimum and Surcharge
Twelve Step
11/16", 3/4", 13/16", 7/8" For A Shipping Pallet.

Cleco Pin Fastener Kits Steel Plate
Cleco pins are reusable and easily Steel plate is useful for many
make a temporary connec- building projects or fabricating
tion between pieces of brackets. 10 gauge (1/8" thick) 1011
sheet metal during fitting. mild steel plate is ideal for adding a protective cover to the
Pins will work with thick- driver’s side floor or door bar area of circle track cars.
nesses up to 1/4". Kits ALL54070 ..... 18" x 26"
include pliers and 10 pins.
ALL54071 ..... 24" x 24"
ALL18221 ..... Kits with 1/8" Pins ALL54072 ..... 24" x 36"
ALL18225 ..... Kit With 3/16" Pins

Stainless Wire Screen
Deluxe Air Rivet Gun
Use screen to protect radiators, oil
ALL18207 coolers or other items. Size referenced is
Heavy duty air rivet gun can be the approximate opening of the screen.
used with steel or aluminum rivets 5/64" (.025" Wire Diameter)
from 3/32" to 3/16".
ALL22260 ..... 12" x 36"
Replacement Part ALL22262 ..... 36" x 36" 5/64"
ALL18209 ..... Replacement Jaws 1/8" (.035" Wire Diameter)
for ALL18207 ALL22265 ..... 12" x 36"
ALL22267 ..... 36" x 36" 1/8"
ALL22268 ..... 36" x 48"
Punch And Flare Tools 3/16" (.047" Wire Diameter)
Add strength and a smooth finish ALL22270 ..... 12" x 36" 3/16"
to hole edges. Unique tools can be ALL22272 ..... 36" x 36"
used to punch and flare new holes, or ALL22273 ..... 36" x 48"
to flare existing holes. Starting with a
small center hole, the punch halves bolt
together to cut and flare at the same Steel Wire Screen
time. Note: This tool will cut a hole in up to 20 Electrically welded steel screen is used for
gauge (.0359") steel or 18 gauge (.0403") aluminum. Hole a variety of applications when additional
size is increased about 1/8" when hole is flared.
protection is needed. Screen is 2' x 2',
ALL11070 ...... 1-1/2" ALL11075 ...... 2-1/2" constructed of .080" diameter wire and
ALL11072 ...... 1-3/4" ALL11076 ...... 2-5/8" galvanized for corrosion resistance.
ALL11074 ...... 2" ALL11078 ...... 3"
ALL22276 ..... 1" x 1"
ALL22277 ..... 1" x 2"

www.allstarperformance.com 13