Page 80 - 2020 Allstar Performance Parts and Equipment Catalog

ELECTRICAL, GAUGES & IGNITION

Heat Shrink Tubing Test Light ALL76215
Single wall Quickly diagnose electrical problems
tubing is placed by testing for current in electrical
over wiring and circuits, relays, switches or
electrical connec- fuses. Handheld test light
tors to seal and has a 36" lead wire with an insulated clip which fastens
strengthen elec- to a common ground and a sharp piercing point to probe
trical connections. insulated wire or terminals. Indicator light illuminates to
Tubing is pre-cut identify powered circuits in 6-12V systems.
to 6" and has a 2:1 shrink ratio, meaning this with shrink
to approximately half the size when heat is applied using a Nylon Tie Wraps
heat gun or other heat source.
Secure electrical wiring, gauge
Heat Shrink Assortment Kit lines and roll bar padding. 100
ALL76160 ..... Includes 9pc of 1/8" and 3/16", 6pcs of 1/4" and per bag. Nylon tie wraps are
3pcs of 3/8" and 1/2" available in black, natural, red,
Individual Sizes (Pack of 20) blue, yellow and purple nylon.
ALL76162 ..... 1/8" ALL76165 ...... 3/8" Black Red
ALL76163 ..... 3/16" ALL76166 ...... 1/2" ALL14120 ...... 3-3/4" ALL14126 .......... 7-1/4"
ALL76164 ..... 1/4" ALL76167 ...... 3/4" ALL14122 ...... 6" ALL14127 .......... 14-1/4"
ALL14123 ...... 7-1/4" Blue
ALL14124 ...... 11-1/4" ALL14128 .......... 7-1/4"
Grommet Set ALL18360 ALL14125 ...... 14-1/4" ALL14129 .......... 14-1/4"
Grommets are perfect for protecting Natural Yellow
wiring and hoses that pass through ALL14130 ...... 3-3/4" ALL14136 .......... 7-1/4"
panels up to 1/16" (.062") thick. Kit ALL14132 ...... 6" ALL14137 .......... 14-1/4"
includes 36 grommets (6 of each size: 1/4", ALL14133 ...... 7-1/4" Purple
5/16", 3/8", 1/2", 5/8" and 11/16"). Grommets ALL11041 ALL14134 ...... 11-1/4" ALL14138 .......... 7-1/4"
are also available in size specific 10-packs. ALL14135 ...... 14-1/4" ALL14139 .......... 14-1/4"

Part No. Grommet Hole I.D. Panel Hole I.D. Nylon Flush Fit Tie Wraps
ALL18362 3/16" 5/16"
ALL18363 1/4" 3/8" Flush fit design ties have the excess
ALL18364 5/16" 7/16" portion of the tie exit in the same
ALL18365 3/8" 1/2" direction as the original tie, helping
ALL18366 1/2" 5/8" to eliminate the protruding sharp
ALL18367 5/8" 7/8"
ALL18368 11/16" 1" portion remaining as found in stan-
dard ties. Package of 100.
ALL14395 ..... 8" Long
Step Drill Sets ALL14396 ..... 11" Long
Drill multiple size holes with one bit.
Drill sheet metal and aluminum without Nylon Tie Wraps With
deforming or distorting. Bits start on Mounting Holes
contact, deburr, and chamfer while ALL11041 Built-in tab with mounting hole to easily
drilling, and do not require a center punch. Titanium secure wiring harnesses, hoses or cables
nitride coated high speed steel. 1/4" shank. to a panel with rivets or other fasteners.
ALL11040 (3-Piece Set) Package of 25.
Drill Bit Sizes ALL14390 ..... 8" With #10 Hole
Six Step 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" ALL14391 ..... 11" With #10 Hole
Nine Step 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"
1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", ALL14392 ..... 14" With 1/4" Hole
Thirteen Step
3/8", 13/32", 7/16", 15/32", 1/2"
Wire Tie Mounting Bases
ALL11041 (2-Piece Set)
Drill Bit Sizes Self-adhesive mounting bases provide a
1/4", 25/64", 35/64", 11/16", 13/16", 7/8", 1", 1-1/8", location for attaching standard wire ties to
Eleven Step
1-7/32", 1-1/4", 1-3/8" secure wiring, cables and hoses. Bases mount to clean flat
3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", surfaces and accept 75# and smaller wire ties.
Twelve Step
11/16", 3/4", 13/16", 7/8" Package of 10.
ALL14116 ...... 3/4" x 3/4" Mounting Base
ALL14117 ...... 1-1/8" x 1-1/8" Mounting Base

78 www.allstarperformance.com