Page 12 - 2018 Allstar Performance Parts and Equipment Catalog

AIR CLEANERS & ACCESSORIES

Filter Cleaning Station Carb Hats
ALL26009 Carburetor hats are ideal
Filter cleaning station simplifies and speeds to cover open carbs and
up the process of servicing 14" washable air prevent debris from falling
filters. Spray air filter with a cleaner/ into the engine while working
degreaser as recommended by filter manu- in garage or pit area while the air ALL26040 ALL26042
facturer. Allow a brief time to soak and cleaner is removed. 2-1/2" tall
then flush clean with a garden hose. carb hats are designed to fit
Allow filter to dry completely then apply an most carbs or throttle bodies
even application of filter oil, if applicable. For with a 5-1/8" diameter neck.
use with washable filter elements only. ALL26040 ..... Plastic Carb Hat ALL26043 ALL26044
ALL26042 ..... Plastic Carb Hat With Screen, Use When
Adjusting Valves
Air Filter Cleaner ALL78222 ALL26043 ..... Aluminum Carb Hat, Standard Spun Aluminum
Spray solution directly onto dirty air filter. Allow ALL26044 .... Aluminum Carb Hat, Deluxe Machined
a brief time to soak, 5-10 minutes then rinse Aluminum With Sealing O-Ring
clean with water. For use with Allstar washable Note: Hats will not clear choke linkage or shaft on Holley style carbs but will clear
air filter elements. Plastic 24 oz. bottle. choke horn with choke linkage and shaft removed.

Breathers Dominator Carb Hat ALL26041
Shielded or non-shielded clamp-on Plastic carb hat is 2-3/8" tall and fits
over the 7-1/4" air cleaner opening of
breathers will fit valve cover tubes. Holley Dominator carburetors to pre-
ALL36202 ..... Non-Shielded Breather, 1-1/2" vent water or debris from entering the
ALL36203 ..... Shielded Breather, 1-1/2" engine. Solid cover may be drilled when an
ALL36204 ..... Non-Shielded Breather, 1-3/8" air cleaner stud is used.
ALL36205 ..... Shielded Breather, 1-3/8"

Breather Sock ALL36208 Sprint Car Wash Plug Set
The breather sock fits over standard 3" Aluminum plugs have O-rings for a
diameter, 2-1/2" tall valve cover breathers water tight seal and will keep dirt out
to help catch residual oil discharged from of injectors while cleaning sprint car.
the engine through valve cover breathers. 4-piece set comes with a nylon storage
A practical alternative to wrapping dirty NEW! pouch.
shop rags around valve cover breathers!
Socks are easily cleaned with a mild detergent. ALL26072
Part No. Size Wash Plug Dia. Stack Dia.
Kinsler
Breather Filters ALL26072 2-1/4" 2.328" 2.335"
Mesh filters add another layer of NEW! ALL26073 2-11/16" 2.762" 2.790"
protection against dirt, dust and ALL26074 2-3/4" 2.848" 2.875"
debris. Fits 3" diameter breathers typically used ALL26075 2-13/16" 2.921" 2.950"
on valve covers, breather tanks and helmet systems. ALL26076 2.90" 2.973" 3.00"
Engler
ALL26227 ..... Fits Non-Shielded Breathers ALL26033 2-1/2" 2.632" 2.650"
ALL26228 ..... Fits Shielded Breathers ALL26035 2-13/16" 2.885" 2.905"
Related Parts ALL26036 2.90" 2.973" 3.00"
ALL36202 ..... Non-Shielded Breather, 1-1/2" ALL26038 3" 3.073" 3.10"
ALL36203 ..... Shielded Breather, 1-1/2" Hilborn
ALL36204 ..... Non-Shielded Breather, 1-3/8" ALL26032 2-7/16" 2.483" 2.50"
ALL36205 ..... Shielded Breather, 1-3/8"

Breather Cover ALL26232
Water-repellent cover fits 3" diam-
eter breathers commonly found NEW!
on valve covers, breather tanks and helmet
systems. Cover with drawstring fits both
shielded and non-shielded breathers.

Jamie Veal Photo: Phil Jordison
10 www.allstarperformance.com