Page 70 - 21154 Hydepark Catalogue web ready PDF

HEAVY DUTY SLIDING GATES

We offer a full design manufacture and installation BENEFITS
service for all types and sizes of Heavy Duty Flood gates.
- Designed to fit any building or opening.
FLOOD MARINE CONTROL or chemical spills. Our largest single heavy duty door to - Any height or width combination possible.
All our gates are individually designed and engineered for - Sliding flood gates have no ‘swing area’ and occupy
the specific customer’s requirements. Whether it is hinged
little space.
or sliding, it will provide the protection against flood water
- Full PI design insurance to give total peace of mind.
date is 6.4m wide and 4.4m high, yet is still operable by a
- All doors can be automated and linked to building
single person.
management systems.
The gates are designed to incorporate, locking and
- Can integrate with building finishes for unobtrusive
monitoring status where needed.
defences.
Hinged or sliding gates can be designed to seal with flood
- Ability to power/automate closing and opening.
water assisting sealing or against the water pressure as
required, meaning they can operate over a dead level
- Always on-site ready to be deployed.
threshold.
SIZES
Sliding gates incorporate spring wheels to allow an easy
- Gates and doors can be fabricated to suit any opening.
sliding operation with the ability to compress seals when - No excavations required for installation.
in position. Alternatively, inflating seals can be used. The - Our largest installed gate to date is 6.4m wide with a
sliding gate design also allows for efficient use of space, 4.4m flood control height.
with no ‘swing area’ required. CONFIGURATIONS
Our Design Team welcomes the opportunity to work - We are able to design to suit any requirement,
alongside architects or directly with clients to identify the depending on building characteristics.
preferred solution. Doors can be clad with a variety of - Large gates can be side hinged, sliding, or raising,
finishes to suit existing finishes so that the flood protection straight or bi-fold.
becomes part of the building aesthetic, rather than as a
post-construction add-on. INSTALLATION
- We are able to provide loading calculations to ensure
that supporting walls are suitable for each application.
USES - Installation can be undertaken during main
- Commercial flood defences. construction of the building, or post-construction by
- Ideal for where deep flood depths are possible. assembly of pre-fabricated components in-situ if-
- Major utility sites requiring vehicle access. required.
- Large openings in flood walls.
Protection of water and land

70 Call: UK 0800 7566 388 | ROI 1800 805 722 Online: hydepark-environmental.com