Page 197 - Full paper สอฉ.3-62
P. 197

The result of the temperature delay test ordered the   ฝุ่ น แรงสั่นสะเทือน ท าให้เกิดความเสียหายทางด้าน
             operation of the temperature controller D1S-2R-220 by setting   กายภาพเกิดสนิม ตลับลูกปืนช ารุด นอกจากนี้ปัญหาอาจ

             the specified SV (Set value) temperature 1 2 0   degrees Celsius   เกิดจากทางด้านระบบไฟฟ้าผิดปกติ ท าให้เกิดความร้อนที่
             and set the delay period of 20 seconds from the experiment can   ตัวขดลวด และท าให้ตัวมอเตอร์สั่น   ท าให้ขดลวดมอเตอร์

             be said that when the temperature inside the oven reaches 120   ลัดวงจรหรือ ไหม้ แกนโรเตอร์ล็อค เป็นต้น
             degrees  Celsius,  the  temp  control  will  immediately  stop              การแก้ไขและซ่อมแซมมอเตอร์ที่เสียหาย มีวิธีการที่
             working. Then temp control will  order a new operation to   ส าคัญคือการพันขดลวดมอเตอร์ใหม่ และการอบไล่
             maintain the temperature inside the cabinet at 1 2 0   degrees   ความชื้นออกจากขดลวดสเตเตอร์จะมีความส าคัญมาก ถ้า

             Celsius. But depending on the user to set the Function "Control   หากมอเตอร์มีความชื้นสาเหตุอาจเกิดจาก น ้าเข้า  น ้ามันเข้า
             period" which used to delay the order from 0-1 2 0   seconds   ฝุ่น คราบจาระบี เข้าไปในขดลวดสเตเตอร์ ในการซ่อม

             according to the experiment schedule. Considerations in setting   ทั่วไปก่อนท าการประกอบมอเตอร์จะต้องล้างท าความ
             is the more users set up the Control period, the more delay of   สะอาดและท าการอบไล่ความชื้น  โดยปกติในการการอบ
             working time and the temperature in the cabinet will decrease.   ไล่ความชื้นนั้นท าได้โดยการใช้ เครื่องเป่าลมร้อน หรือ ใช้

             It is caused the temperature inside the cabinet to not reach 120   ไฟสปอร์ตไลท์ ท าให้การกระจายความร้อนให้กับขดลวด
             degrees Celsius according to the standard. If the Control period   สเตเตอร์ไม่สม ่าเสมอ และเมื่อมีมอเตอร์ต้องการอบหลาย

             is set to be low, the work will be edited faster which caused a   ตัวการใช้เครื่องเป่าลมร้อนต้องใช้ก าลังคนมาก ท าให้เกิด
             negative  effect  on  the  device.  Therefore,  choosing  the   ปัญหาและความล่าช้าในการใช้ก าลังคนส าหรับถือเครื่อง
             appropriate settings which is set at 2 0   seconds at a 2 0   second   เป่าไล่ความชื้น และไม่สามารถควบคุมอุณหภูมิในการอบ
             delay will able to work within the specified limits. The test of   ไล่ความชื้นได้   จากปัญหาที่ได้กล่าวมาข้างต้น  จึงได้จัดท า

             the operation of the Semi-Automatic Electric Motor Incubator   ตู้อบมอเตอร์  ไฟฟ้าแบบกึ่งอัตโนมัติขึ้น เพื่อความสะดวก
             is that the operation did not find an error and followed in the   ต่อการใช้งาน ช่วยลดเวลาในการท างาน และเพื่อเพิ่ม

             objectives. The summary of the operation of a Semi-Automatic   ประสิทธิภาพ ในการท างานของมอเตอร์ที่ผ่านการซ่อมให้
             Electric Motor Incubator works efficiency.          ดียิ่งขึ้น



             1.  ค าน า


                ในปัจจุบันโรงงานอุตสาหกรรมทุกที่ต้องมี “มอเตอร์”  ซึ่ง
                มอเตอร์ (Motor) เป็นเป็นอุปกรณ์ไฟฟ้าท าหน้าที่เปลี่ยน

                พลังงานไฟฟ้าให้เป็นพลังงานกล โดยพลังกลที่ได้จะถูก
                น าไปใช้ประโยชน์ด้านต่างๆ มอเตอร์ในงานอุตสาหกรรม

                ปัจจุบันมีการใช้งานกันอย่างแพร่หลายตัวอย่างเช่น ปั้มน ้า
                ปั้มลม เครน เกียร์ และอื่นๆอีกมากมาย แม้กระทั่งน ามาใช้
                งานในกระบวนการผลิตของอุตสาหกรรมต่างๆ แต่เมื่อมี

                การใช้งานอย่างหนักและระยะเวลาที่ต่อเนื่องจะส่งผลท า
                ให้ประสิทธิภาพการท างานของมอเตอร์ลดลงและได้รับ

                ความช ารุดเสียหาย ซึ่งปัจจัยที่ท าให้มอเตอร์ช ารุดเสียหาย
                ได้แก่ จากทางด้านสภาวะแวดล้อม เช่น อุณหภูมิ ความชื้น


                                                              2
                                                                                                              179
   192   193   194   195   196   197   198   199   200   201   202