Page 4 - StepbystepinstructionsConverterMagic

7. Inject the Converter Magic™ product
● Inject the Converter Magic™ revitalization solution by inserting the
injection hose into the top of the Converter Magic™ solution canister.

● The vacuum will suck the solution from the container
● Allow the suction to continue until all of the Converter Magic™ solution is
used.

8. Remove the Converter Magic™ injection nozzle
● Remove the Converter Magic™ injection nozzle from the Pre-Catalytic
converter oxygen sensor insertion port.
● You can now turn off the Shop Vac.
● Dispose of the Converter Magic™ product and packaging.

9. Re-install the pre Cat Oxygen Sensor
● Carefully reinstall the Oxygen Sensor you removed earlier.
● Insert the oxygen sensor into the insertion port and screw it in using the
proper o2 wrench, tighten to specifications.
● Make sure all wires and connecting plugs are properly connected and
secured.

10. Remove the vacuum from the tail pipe
● Remove the vacuum and duct tape from your car's tail pipe.
● Remove the paper filter from the vacuum canister and dispose of it along
with the duct tape.

Converter Magic™ Repair and rejuvenate your catalytic converter