Page 212 - Chief Architect Reference Manual
P. 212

Chief Architect X10 Reference Manual



                                       Fillet
                                                                     To  produce  fillets  or  chamfers  of  an
                             The Fillet mode allows you to add a     exact  radius,  use  the  Fillet  Lines  or
                             fillet, or curve, at any corner of an   Chamfer Lines edit button. See “Fillet Lines”
                        object. Dragging a corner edit handle adjusts   on  page  261  and  “Chamfer  Lines”  on  page
                        the fillet radius at that corner. When this   262.
                        mode is active, the Fillet    icon displays
                        near the mouse pointer.                     Connect CAD Segments
                        •  D  r  a  w  i  n  g     -     Standard click and drag   Typically, when two CAD objects
                           drawing behavior is enabled.              share the same properties, they can be
                                                                snapped end-to-end to form a polyline.
                        •  Resize/Reshape - Fillet allows you to   Connect CAD Segments controls whether
                           create a fillet at by dragging a corner edit   CAD objects can be snapped together to
                           handle inward.
                                                                form polylines. See “Polylines” on page 312.
                                                                When Connect CAD Segments       i  s
                                                                diabled, the Connect CAD Segments    icon
                                                                displays near the mouse pointer and CAD
                                                                objects cannot form polylines.
                                                                Select Edit> Edit Behaviors> Connect
                                                                CAD Segments     to toggle this behavior
                                                                on or off. You can also turn Connect CAD

                                   Fillet edit behavior         Segments    on or off in the Preferences
                                                                dialog. See “CAD Panel” on page 122.
                        •  Movement - Move mode allows you to
                           move objects at Allowed Angles.            Rotate/Resize About
                        •  Rotation - In Move mode, objects snap          Current Point
                           at Allowed Angles as they are rotated.
                                                                     Objects can be rotated or resized
                        The Fillet    edit behavior adjusts all the   about either their own centers or the
                        corners of a box at once. The radius of each   current CAD point. See “The Current Point”
                        corner is the same.                     on page 294.

                        Fillet    does not have an effect on circles,
                        ovals, ellipses or arc segments.

                        You can temporarily enable the Fillet
                        edit mode when another mode is active by
                        pressing F while performing an edit or
                        drawing operation.




                   212
   207   208   209   210   211   212   213   214   215   216   217