Page 312 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

Circle/Oval/Ellipse Specification Dialog

Select a circle, oval or ellipse and The CAD Circle, Oval, and Ellipse
click the Open Object edit button to Specification dialogs are almost exactly the
open the CAD Circle, Oval or Ellipse same. The Oval and Ellipse Specification
Specification dialog. dialogs have an additional setting for Angle
on the GENERAL panel.

General Panel

1 Specify the position of the circle, oval Line Style Panel
or ellipse’s Center Point.
For information about the LINE STYLE panel,
• Specify the X Position and Y Position of see “Line Style Panel” on page 301.
the center of the circle, oval or ellipse.
• Specify an oval or ellipse’s Angle. Not Fill Style Panel
available for circles.
For information about the FILL STYLE panel,
2 Size - Specify the Length and Width see “Fill Style Panel” on page 315.
of an oval or ellipse, or the Diameter
and Radius of a circle.

Polylines

A polyline consists of two or more rectangular-shaped, closed polyline. A
line and/or arc segments that are closed polyline measuring 2’x 2’ (600 mm x
attached at their endpoints. Select CAD> 600 mm) can also be created by clicking
Boxes> Rectangular Polyline, then click once while the Rectangular Polyline tool is
and drag from corner to corner to create a active.

312