Page 496 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

Paragraph Options Dialog
• If you select User Specified Line
Height, type the desired height for each
line of text in the selected paragraph(s).
For best results, this value should be at
least as much as the largest character size
used in the selected paragraph(s).

3 Specify the appearance of the side
Margins of the selected paragraph(s),
as measured in from edges of the text box.
Only positive Margin values can be used.
• Specify the Indent, which is measured
from the left side margin. A negative
value can be used if a left Margin has
been specified.

4 Specify the appearance of Bullets and
numbering in the selected paragraph(s).
• Select the desired bullet, numbered, or
lettered Type from the drop-down list.
• Specify the Number Prefix, which are
any characters that you would like to dis-
play before the selected paragraph’s num-

1 Specify the Alignment of the selected ber or letter. Does not affect paragraphs
using circle or square bullets.
paragraph(s). See “Aligning Text” on
page 506. • Specify the Number Suffix, which are
any characters that you would like to dis-
2 Specify the Line Spacing of the play after the selected paragraph’s num-
selected paragraph(s).
ber or letter and before its actual text.
• Click the radio button beside Single, 1.5 Does not affect paragraphs using circle or
Lines, Double or User Specified. square bullets.

Appearance Panel
color, line weight and line style. See
Leader Lines and Text Lines with
“Layers” on page 184.
Arrows use the same default layer as
Rich Text, so they share the same default

496