Page 558 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

2 Specify the number of Trimmers to be located in a concrete or masonry wall, stem
generated on each side of the selected wall, or garage curb. See “Wall Type
door. Definitions” on page 383.
3 Rough Opening - Specify the amount • Uncheck Show in Plan to suppress the
to add to Each Side, the Top and the display of the concrete cutout in plan
Bottom for the door’s framed rough opening. views. A concrete cutout will only dis-
The rough opening should be large enough to play in plan views if it is located in a
accommodate the door frame and space for garage curb. See “In Plan Views” on page
shims. Window frames do not need to be 535.
included in the rough opening: only shim Sill - When the bottom of a door is
space. If the Bottom Rough Opening value is 5 raised sufficiently off the floor, it will
greater than the Floor to Bottom value, the require a sill as part of its framing.
difference is added to the top of the rough
opening when framing is built. • Specify the vertical Thickness of the sill.
• Check Double Sill to generate two sill
4 Add for Concrete Cutout - Specify members of the specified thickness
the amount to add to Each Side of the
door opening when the upper part of the door instead of one.
is in a framed wall and the lower part is

Energy Values Panel
The settings on the ENERGY VALUES panel REScheck. See “Export to REScheck” on
let you specify information used for export to page 1199.

558