Page 245 - HILTI

Ultimate-performance hybrid mortar HIT-HY 200-R
Technical data Approvals
Base material Dry, Wet ETA ETA-12/0083 for HIT-HY 200-R
condition injection mortar for rebar (ETAG
001-05, Option -)
Anchoring elements HAS threaded rods,
HIS-N internally-thread- ETA, Seismic ETA 12/0028 for HIT-HY 200-R
ed inserts, HIT-V injection mortar and HIT-Z(-R)(-F)
threaded rods, HIT-Z rod for anchoring applications
torque-controlled (ETAG 001-05, Option 1)
bonded anchors, HZA ETA 12/0084 for HIT-HY 200-R
Key applications and advantages tension anchor, Rebar injection mortar and standard el-
■ Anchoring structural steel connections Environmental Covered by ground soil, ement for anchoring applications
(e.g. steel columns, beams) conditions Highly corrosive special (ETAG 001-05, Option 1)
applications, Indoor, Approvals and test reports may apply to selected
■ Anchoring safety barriers, balustrades,
damp conditions, products only. Please refer to the documents for
fire escape staircases
Indoor, dry conditions, details.
■ Seismic strengthening / retrofitting and Indoor, ventilated
bracing of reinforced concrete buildings facades, Outdoor
■ No hole cleaning required with the revo- Type of fastening Pre-fastening,
lutionary new Hilti HIT-Z anchor rod Through-fastening
■ Automatic hole cleaning with TE-CD Cleaning Auto-cleaning with Hilti
and TE-YD drill bits in combination with procedures hollow drill bits, Com-
pressed-air cleaning,
Hilti vacuum cleaners Manual cleaning, No
cleaning required with
Hilti HIT-Z rod
Material Hybrid urethane meth-
composition acrylate adhesive
Ordering designation Content per Shelf life from date of man- Compatibility Mixer extension Number Package Sales pack Item number
can/cartridge ufacture (at 23°C and 50% sleeves included of mixers contents quantity
relative humidity) included
HIT-HY 200-R 330/2/EE 0.33 l 12 months No Yes 2 1x Foil pack, 2x 1 pc 2045036
Mixer, 1x Mixer
extension
HIT-HY 200-R 500/2/EE 0.5 l 12 months No Yes 2 1x Foil pack, 2x 1 pc 2045032
Mixer, 1x Mixer
extension

Standard hybrid mortar HIT-HY 170

Technical data Approvals
Anchoring elements HIT-V threaded rods ETA 14/0457 for HIT-HY 170
injection mortar for anchoring
Material Hybrid urethane meth- applications (ETAG 001-05,
composition acrylate adhesive Option 1)
Tested/approved No ETA 15/0197 for HIT-HY 170
for diamond drilling injection mortar for anchoring in
masonry
Storage and trans- 25 °C
ETA-15/0297 HIT-HY 170 injec-
portation tempera-
Key applications and advantages tion mortar for rebar
ture - max.
■ Connection of secondary post-installed Approvals and test reports may apply to selected
Storage and trans- 5 °C
rebars products only. Please refer to the documents for
portation tempera- details.
■ Substitution of misplaced / missing
ture - min.
rebars
Mixer types HIT-RE-M
■ Fastenings in hollow and solid masonry
■ Suitable for use in masonry materials or
cracked and uncracked concrete with
all anchor rods (ETA report)
■ Suitable for use in masonry materials,
for post-installed rebars, in cracked and
uncracked concrete with anchor rods in
accordance with ETA report
Ordering designation Content per can/cartridge Shelf life from date of manufacture (at Package contents Sales pack Item number
23°C and 50% relative humidity) quantity
HIT-HY 170 500/2-EE 0.5 l 12 months 1x Foil pack, 2x Mixer, 1x Mixer extension 1 pc 2132024

236 Visit the local website for more information on products and services