Page 281 - HILTI

Ultimate-performance undercut anchor for shallow
embedment (stainless steel) HSC-AR

Key applications and advantages Technical data
■ Safety-relevant, medium-duty fasten- Head configuration Externally threaded
ings in cracked or uncracked concrete Environmental Outdoor
and corrosive environments, especially
conditions
where shallow embedment and/or
small edge distance or close spacing is Type of fastening Pre-fastening
required Material Steel, A4 (SS316)
■ Examples: stair hand rails, balcony composition
safety railings, sprinkler pipes, air ducts, Installation All
seating, facade substructures, car park direction
barriers, etc. PROFIS software Yes
■ Shallow embedment depth for thin con- Yes
crete slabs or where permissible drilling Leadership in ener-
depth is limited gy and environmen-
tal design
■ Combines high working loads with
small edge distances and close spacing Additional product Meets approval require-
information ments when installed
thanks to very low expansion forces
using the specified stop
drill bit, setting tool and
rotary hammer
Material, corrosion Steel, stainless
Required inserts TE-C-HSC-MW,
TE-C-HSC-B
Ordering designation Anchor Base plate Required tight- Wrench Anchor Length identification mark Min. embed- Sales pack Item number
size clearance hole ening torque size length ment depth quantity
HSC-AR M8x40/15 M8 9 mm 10 Nm 13 mm 72 mm Two notches at end of anchor 40 mm 25 pc 31148
sleeve
HSC-AR M8x50/15 M8 9 mm 10 Nm 13 mm 82 mm No notch at end of anchor 50 mm 25 pc 31150
sleeve
HSC-AR M10x40/20 M10 12 mm 20 Nm 17 mm 80 mm Two notches at end of anchor 40 mm 25 pc 31149
sleeve
HSC-AR M12x60/20 M12 14 mm 30 Nm 19 mm 104 mm Three notches at end of 60 mm 20 pc 15506
anchor sleeve

Ultimate-performance internally threaded undercut
anchor (carbon steel) HSC-I

Key applications and advantages Technical data
■ Safety-relevant, medium-duty fasten- Head configuration Inner thread
ings in cracked or uncracked concrete, Environmental Indoor, dry conditions
especially where shallow embedment conditions
and/or small edge distance or close
spacing is required Type of fastening Pre-fastening
■ Examples: stair hand rails, sprinkler Material Bolt: steel, 8.8 grade,
pipes, air ducts, seating, facade sub- composition zinc-plated (min. 5 µm)
structures, car park barriers, etc. Installation All
■ Shallow embedment depth for thin con- direction
crete slabs or where permissible drilling PROFIS software Yes
depth is limited
Leadership in ener- Yes
■ Combines high working loads with gy and environmen-
small edge distances and close spacing
tal design
thanks to very low expansion forces
Additional product Meets approval require-
information ments when installed
using the specified stop
drill bit, setting tool and
rotary hammer
Material, corrosion Steel, zinc-plated
Required inserts TE-C-HSC-MW,
TE-C-HSC-B
Ordering Anchor Internal Thread Thread Base plate Required Wrench Package contents Sales pack Item number
designation size thread size engagement engage- clearance hole tightening size quantity
depth - max. ment torque
depth
- min.
HSC-I M8x40 M8 8 mm 22 mm 8 mm 9 mm 10 Nm 13 mm 0.08x Setting tool HSC-EW 16 25 pc 31143
HSC-I M10x50 M10 10 mm 28 mm 10 mm 12 mm 20 Nm 17 mm 0.04x Setting tool HSC-EW 18 25 pc 31144
HSC-I M10x60 M10 10 mm 28 mm 10 mm 12 mm 20 Nm 17 mm 0.04x Setting tool HSC-EW 18 25 pc 31145
HSC-I M12x60 M12 12 mm 30 mm 12 mm 14 mm 30 Nm 19 mm 0.04x Setting tool HSC-EW 20 25 pc 31146

272 Visit the local website for more information on products and services