Page 351 - HILTI

Firestop and Fire Protection Systems

Firestop plug CFS-PL Firestop speed sleeve CP 653
Technical data Approvals Technical data Approvals
Approx. density 0.27 g/cm³ ETA ETA-13/0099 for CFS-BL firestop Base materials Concrete, Masonry, FM (Factory
block for penetrations Drywall
Colour Red Mutual)
FM (Factory Expansion temper- 160 °C
Application temper- 5 - 40 °C Mutual) ature (approx.) Penetration W-L-3385
ature range Approvals and test reports may apply to selected Expansion ratio 1:19 Approvals and test reports may apply to selected
products only. Please refer to the documents for products only. Please refer to the documents for
Base materials Concrete, Masonry, (unrestricted, up to) details.
Drywall, Gypsum details.
Temperature resist- -30 - 100 °C
Key applications and advantages Expansion ratio 1:3 Key applications and advantages ance range
■ Temporary or permanent sealing around (unrestricted, up to) ■ Sealing penetrations with single cables LEED VOC 7.6 g/l
cables and cable bundles in wall and Expansion temper- 200 °C and cable bundles
floor openings ature (approx.)
■ Suitable for small to medium-sized
■ Sealing around cables and cable bun- circular openings in walls, ceilings and
dles where immediate functionality after floors
installation is essential
■ For use in walls and floors
■ Sealing openings where repenetration
■ Easy and fast to install and to inspect
and retrofitting of cables is frequent
■ Fully functional immediately after
■ Easy to install, no electric tools required
installation
■ Economical installation as the plug is
pre-cured and ready-to-use
Ordering designation Outside diameter (flange) Core bit diameter Sales pack Item number
Ordering designation Package contents Sales pack Item number quantity
quantity
CP 653 2” BA 120 mm 63 mm 1 pc 2008603
CFS-PL 2” 1x Firestop plug CFS-PL 2” 10 pc 2030021
CP 653 4” BA 170 mm 113 mm 1 pc 2008604
CFS-PL 4” 1x Firestop plug CFS-PL 4” 6 pc 2030022

Drop-in device CFS-DID

Technical data Approvals
Expansion temper- 180 °C FM (Factory
ature (approx.) Mutual) Firestop and Firestop and Fire Protection Fire Protection Systems Systems
Expansion ratio 1:19 Approvals and test reports may apply to selected
(unrestricted, up to) products only. Please refer to the documents for
details.
Temperature resist- -20 - 88 °C
ance range
LEED VOC 0.2 g/l
Key applications and advantages
■ One-step firestop solution for plastic,
metal and insulated metal pipes through
cored or sleeved holes
■ For use in concrete, hollow core and
concrete-over-metal deck slab thick-
nesses from 2-1/2” to 12-1/2”
■ Suitable for use in renovation as well as
new construction
■ Integrated moisture and smoke seal
■ Simple, quick installation
Ordering designation Dimensions (LxWxH) Height Sales pack Item number
quantity
CFS-DID 2” MD 180 x 134 x 71 mm 71 mm 1 pc 2008251
CFS-DID 2” C 180 x 134 x 150 mm 150 mm 1 pc 2008097
CFS-DID 3” MD 210 x 164 x 71 mm 71 mm 1 pc 2008252
CFS-DID 3” C 210 x 164 x 150 mm 150 mm 1 pc 2008098
CFS-DID 4” MD 230 x 174 x 71 mm 71 mm 1 pc 2008253
CFS-DID 4” C 230 x 174 x 150 mm 150 mm 1 pc 2008099
CFS-DID 6” C 300 x 253 x 150 mm 150 mm 1 pc 2008250

342 Visit the website for more information on products and services. www.hilti.group 343