Page 79 - HILTI

Drilling and Demolition

Auger bit WDB A SDS-plus corded combihammer TE 30-ATC/AVR

Key applications and advantages Technical data Key applications and advantages Technical data
■ Accurate drilling in wood, heavy timber Base material Wood ■ Drilling anchor holes and through-holes Triaxial vibration 10 m/s²
and nail-embedded wood, also suitable Connection end Hexagonal in concrete and masonry, diameter value for hammer
for deep drilling range 4-28 mm, recommended range drilling into con-
■ Self-feeding threaded tip helps pull the Tool type SF 14-A, SF 18, SF 22- 10-20 mm crete (ah,HD) 1)
A, SFC 14-A, SFC 18,
bit through the wood ■ Drilling holes for rebar doweling, diam- Dust removal TE DRS-S (optional)
SFC 22-A, SFH 14-A,
■ Large flutes for efficient chip removal SFH 18, SFH 22-A, UD eter range 4 - 28 mm, recommended module
16, UD 30, UH 700 range 10 - 20 mm Rotation speed 850 rpm
Working mode Drilling only ■ Corrective chiselling gear 1 under no Drilling and Demolition
■ Very high drilling speed load
Ordering designation Diameter Length Working length Sales pack Item number ■ Exceptionally high power-to-weight Single impact 3.6 J
quantity energy
ratio
8x255/320 8 mm 320 mm 255 mm 1 pc 304988 Weight according 4 kg
10x255/320 10 mm 320 mm 255 mm 1 pc 304989 to EPTA Procedure
10x400/460 10 mm 460 mm 400 mm 1 pc 304990 01/2003
12x255/320 12 mm 320 mm 255 mm 1 pc 304991 Full hammering 4500 impacts/minute
12x400/460 12 mm 460 mm 400 mm 1 pc 304992 frequency
14x255/320 14 mm 320 mm 255 mm 1 pc 304993 Working mode Hammer drilling, Chis-
elling, Chisel setting,
14x400/460 14 mm 460 mm 400 mm 1 pc 304994
Drilling only
16x255/320 16 mm 320 mm 255 mm 1 pc 304995
Chiselling function Yes
16x400/460 16 mm 460 mm 400 mm 1 pc 304996
18x255/320 18 mm 320 mm 255 mm 1 pc 304997 Service indicator No
18x400/460 18 mm 460 mm 400 mm 1 pc 304998 Active Torque Yes
20x255/320 20 mm 320 mm 255 mm 1 pc 304999 Control
20x400/460 20 mm 460 mm 400 mm 1 pc 305000 1) according to EN 60745-2-6
22x255/320 22 mm 320 mm 255 mm 1 pc 305001
Ordering designation Package contents Sales pack Item number
22x400/460 22 mm 460 mm 400 mm 1 pc 305002
quantity
24x400/460 24 mm 460 mm 400 mm 1 pc 305003
Kit TE 30-ATC 230V + TE16/TE 30 1x Combihammer TE 30-ATC 230V, 1x Case, 1x Quick-release chuck TE 16/TE 30 1 pc 2160645
26x160/235 26 mm 235 mm 160 mm 1 pc 305004
TE 30-ATC 230V cas 1x Combihammer TE 30-ATC 230V, 1x Case 1 pc 2069951
26x255/320 26 mm 320 mm 255 mm 1 pc 305005
28x255/320 28 mm 320 mm 255 mm 1 pc 305007
30x255/320 30 mm 320 mm 255 mm 1 pc 305009
32x255/320 32 mm 320 mm 255 mm 1 pc 305011

Mixing paddle TE-MP
Key applications and advantages Technical data
■ Mixing mortars, epoxy mortars, plaster, Base material Mortars
screed and concrete
Connection end Hexagonal
■ Ideal mixing solution for Hilti systems
Material coating/ Coated
plating/finish
Working mode Drilling only

Ordering designation Length Outside diameter Sales pack Item number
quantity
TE-MP 80 500 mm 80 mm 1 pc 41215
TE-MP 110 600 mm 110 mm 1 pc 41216

70 Visit the local webiste for more information on products and services www.hilti.group 71