Page 51 - Soudage

Ancillary equipment

Remote controls

M1 10Prog CAN

CAN based remote control for control
panel A24, A44, MA23, MA23A, MA24,
MA43, MA44, U6, U8 , TA24, TA24 AC/ Ordering information
2
DC, TA34 and TA34 AC/DC. M1 10Prog CAN 0459 491 882
MIG/MAG: Memory 1-10 and voltage trim +/-
TIG/MMA: Memory 1-10 and current trim +/-
Pulse TIG: Memory 1-10 and pulse
current trim +/-

FS 002

Foot pedal for starting and stopping as Ordering information
well as for stepless current setting. Max. FS 002 with 5 m cable, 12 p, 0349 090 886
current can also be set using a potenti- (Type C)
ometer. Used mostly for TIG welding.

T1 Foot CAN
Foot pedal for starting and stopping as Ordering information
well as for stepless current setting. Used T1 Foot CAN with 5 m cable,
mostly for TIG welding. 12 p, (Type A) 0460 315 880
Extension cable 5 m, 12 p 0459 554 886
T1 Foot CAN with 5 m cable,
10 p, (Type B) 0460 315 881

AT1

Analogue standard remote control for Ordering information
MMA and TIG. Suitable for power AT1 0459 491 896
sources with remote outlet.
MMA/TIG: Current control.

AT1 CoarseFine

Analogue standard remote control for Ordering information
MMA and TIG. Suitable for power AT1 CoarseFine 0459 491 897
sources with remote outlet.
MMA/TIG: Current control, coarse/fine.

M1

Analogue standard remote control. Ordering information
Suitable for MIG for control panel M1 0459 491 895
M10, M12 and M13.
MIG/MAG: Wire feed and voltage control

49