Page 63 - Soudage

Manual plasma cutting equipment

Plasma torches

Plasma gouging and aluminium).
Only two parts need to be changed (no
Plasma gouging is an effective way of tools needed) to gouge instead of cut –
removing material, when preparing for the the nozzle and an additional metal goug-
next layer to be welded or for removing ing heat shield.
faults. Generally speaking, the advan-
tages of using plasma instead of carbon Ordering information
rods are 50% less noise, 50% fewer parti- Gouging nozzle, PT 26 0558 003 718
cles in the air, 50% less energy con- Close proximity shield, PT 26 0558 003 715
sumed, no carbon deposits in the material Gouging nozzle, PT 38 60A 0558 008 588
and the fact that gouging can be per- Gouging shield, PT 38 60A 0558 008 591
formed on all materials (even high-alloyed Gouging nozzle, PT 38 90A 0558 007 681
Gouging shield, PT 38 90A 0558 008 186

Wear part kits Ordering information
Wear parts kit, PT 26 0558 002 864
These wear part kits organize your Wear parts kit, PT 31XL, 35A 0558 003 462
plasma cutting wear parts for more effi- Wear parts kit, PT 31XL, 50A 0558 003 464
cient handling. Wear parts kit PT38, 60A 0558 003 419
Includes: electrodes, swirl baffle, nozzles, Wear parts kit PT38, 90A 0558 007 640
heat shield etc.

Torch guide kits Ordering information
Deluxe cutting guide kit, PT 17,
The deluxe guide kit can be used for 23, 25, 27, 31XL, 32EH,
straight line, circular (45 to 1050 mm) or 34 and 38 0558 003 258
bevel plate edge preparations. Position Basic circle guide kit, PT 23, 27,
using pin on rivot mark, magnet or suc- 31XL, 32EH, 34 and 38 0558 002 675
tion cup. The same kit can be used for
torches PT 17, 23, 25, 27, 31XL, 32EH,
34 and 38. A basic kit for plasma cutting
torches PT 17, 23, 25, 27, 31XL, 32EH,
34 and 38 with circular guide (45 to
750 mm) using pin on rivot mark is also
available.

PT 26 Ordering information
PT 26, 70°, 7.6 m 0558 002 208
This versatile, easy-to-use, 300 Amp, PT 26, 70°, 15 m 0558 002 209
water-cooled plasma cutting torch pro- PT 26, IN-LINE, 7.6 m 0558 002 320
vides superior performance for a full PT 26, IN-LINE, 15 m 0558 002 321
range of manual and mechanised cutting. Electrode, air N, N/H 0558 003 722
Available in a manual version and a Electrode Ar/H (H35) 0558 003 723
mechanised version (IN-LINE). Used on Nozzle, 150 A, w O-ring 0558 003 717
ESP 150. Nozzle, gouging, with O-ring 0558 003 718
Heat shield 0558 003 714
Stand-off guide 0558 003 713
Remote hand switch 0558 003 796
Baffle tube with O-rings 0558 003 708
Insulator with O-rings 0558 003 711
Torch head with O-rings PT 26 0558 003 719
PT 31XL Ordering information
Heat shield 0558 000 509
The PT 31XL is the smallest 50 A plasma Nozzle, 35/40 A 0558 000 508
cutting torch on the market. Designed for Swirl baffle 0558 000 506
superior operator comfort. Rated at 50 A Electrode 0558 000 507
in continuous operation. Specially Plunger 0558 000 511
designed to make it easy to access Replaceable seat 0558 000 510
places that are difficult to reach. For drag Torch body 0558 000 790
cutting with HF starts. Nozzle, 50 A 0558 000 513
PT31XL is used on CaddyCut, Handy- PT 31XL, 4.5 m torch 0558 001 466
Plasma 50 and PCM 500i. PT 31XL, 7.6 m torch 0558 000 690
PT31XLPC is a PT31XL with torch con- PT 31XLPC, 7.6 m torch 0558 005 393
nections for PC650.
61