Page 7 - CAT-SAFETOP-2019-ENGLISH

OCULAR EYE PROTECTION

LENS MARKING FRAME MARKING

CE CE logo
CE CE logo
SAFETOP Manufacture brand
SAFETOP Manufacture brand
EN166 Standard
Optical class
1 For long periods of use Impact resistance
2 Intermittent works Increased robustness
S
3 Occasional work with the prohibition of permanent use
F Low energy impact (45 m/sg)
Impact resistance B Medium energy impact (120 m/sg)
A High energy impact (190 m/sg)
Increased robustness
S
T Extreme temperature (-5º/+55ºC)
F Low energy impact (45 m/sg)
No symbol: Minimum solidity classification
B Medium energy impact (120 m/sg)
A High energy impact (190 m/sg)
Field of use
T High speed particles at extreme temperature (-5º/+55ºC)
No symbol: Indefinite mechanical risks
Optional requirements
3 Liquids (droplets or splashes)
K Resistance to damage caused by fine particles
4 Large-particle dust
N Anti-fog
5 Gas and fine dust particles
H Eye protection of small heads
8 Electric arc in short-circuit range
9 Molten metal and hot solids
Lenses. Filter type
2 UV filter
Ultraviolet radiation 2 or 3 2C UV filter with good color recognition The marking of the frame must be mandatory: the CE logo, the manufacturer's
Infrared radiation 4 3 Sunlight filter with IR protection identification (brand or logo), the EN standard, the protection symbols for
Solar radiation 5 or 6 5 UV filter without color’s alteration
6 Sunlight filter without IR protection mechanical resistance (A, B, F, A and / or T) and the fields of use (3, 4, 5, 8,
Welding DIN 5-9 9, H)
The second number separated by a hyphen
is the gradation (see table below)

5