Page 56 - All Task Solutions - KENT Best Seller Range 2019

Primers, Coatings & Bodyfillers

Plaz Tex Clear 2 - KE84586

Allows the replication of the molded texturising on modern plastic bumpers, dashboards and other plastic
fittings.

Part Nº: KE84586 Plaz Tex Clear 2 (PTC2) 400ml Aerosol

Features Benefits

• Recreates OEM Finish • Gives undetectable repair
• Fast drying • Quick throughput in workshop
• Suitable for most plastics • Use with confidence
• Compatible with leading paint systems • No comebacks

Applications Instructions

Plaz Tex Clear 2 is the ideal solution to Key area requiring texturising with light abrasive or
re-texturing plastics after a plastic repair Nylon finishing pads.
has been undertaken. It can be used for De-grease with suitable cleaner such as
cosmetic repairs on: - KENT Plastic Prep or Acrysol.
Bumpers, spoilers, air dams, side skirts, mirror Allow to dry thoroughly
housings and plastic wheel trims, Mask off area to be re-textured.
Holes in dashboards, centre consoles, Shake aerosol can thoroughly before use
plastic door panels and fascia trim. Spray light coats of Plaz Tex Clear 2 to repair surface
from a distance of 20-30cm in short, sweeping
Typical applications include: - bursts. Allow a minimum of 5 minutes between coats.
• Existing Plastic Repair Repeat steps 2/3 until desired finish is achieved.
• Bodyshops It will be necessary to feather (blend) in the edge
• SMART Repair specialists of the re-textured area with the natural texture
• Used vehicle preparation sites of the bumper.
• Fleet repair specialists NB. Invert can and spray out to avoid blockage
of the nozzle.