Page 77 - Airblade® Dryer - Mix and Match

AIRBLADE® DRYER Mix and Match

Installation

10-Nozzle Frame Assembly: Floor Mounted

Note: Drip space is the distance between the last Rinse Arch and the Dryer. Typically, the larger
the drip space, the better the Dryer can perform.

6) Once both legs have been attached to the head beam, space them as shown in the
image below.

136” 91”

45”

Floor

Note: 45” dimension is taken from the outside of the driver side leg to the inside of the passenger
side Guide Rail. Actual tunnel depth will vary according to available building space.

7) Once the component is properly placed, leveled in all directions and the legs are
squared, you can tighten all of the fasteners and lag the frame to the floor.
8) Locate the following parts and the two Air Cannon motor assemblies:

Item Qty Clamp Assembly (2)

Mounting Bracket Clamp 1
1/2-13 X 3-1/2” HHCS 2
1/2-13 X 4-1/2” HHCS 2
3/8-16 Regular Nut 8
3/8” Flat Washer 8

3/8” Lock Washer 4
3/8-16 x 2” HHCS 4
1/2” Flat Washer 4
1/2” Lock Washer 4

AirBlade® Side Mount Weldment 1

1MANUL011 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 73