Page 4 - DuraTrans XD® Conveyor

CURRENT REVISION LOG
Trans XD® Conveyor
Release
Rev Page Description
Date
06 26OCT12 REV Added Revision Log
TOC Consolidated Maintenance articles into one section
Removed paragraph 4 of rev 05, DuraTrans™ was Over/Under Conveyor
8 in paragraph 5 of rev 05, updated image of conveyor assembly to reflect
the current design.
Added data for 4-Wheel Roller (Standard) & Added “Optional” to 6-Wheel
9
Roller data.
11 Updated conveyor section/assembly images to reflect the current design.
Added image of Standard 4-Roller Assembly & Updated the title of the 6-
12
Roller Assembly to be “Optional BIS-6 Roller Assembly”.
16 Updated conveyor section/assembly images to reflect the current design.
18 Updated conveyor section/assembly images to reflect the current design.
21 Updated conveyor section/assembly images to reflect the current design.
23 Updated conveyor section/assembly images to reflect the current design.
Updated instructions and images to reflect 4-roller design (now standard)
24
instead of 6-roller design (now optional).
25 Updated chart based on formulas given on the same page.
Updated instructions and images to reflect 4-roller design (now standard)
26
instead of 6-roller design (now optional).
28 Conveyor Controller System was DCC.
29 Conveyor Controller System was DCC.
32 Conveyor Controller System was DCC.
36 Updated conveyor section/assembly images to reflect the current design.
37 Updated conveyor section/assembly images to reflect the current design.
45 Updated conveyor section/assembly images to reflect the current design.
47 Added first bullet on proper chain tension.
Updated Powder Coat article and consolidated it into the Maintenance
49-51
section.
Consolidated the HECO Hydraulic Gearbox article into the Maintenance
52-57
section.
For Part number 102959 “DXD” was “DXB” and updated conveyor
58
section/assembly images to reflect the current design.
59 Updated conveyor section/assembly images to reflect the current design.
60 Updated conveyor section/assembly images to reflect the current design.
62 Updated conveyor section/assembly images to reflect the current design.
64 Updated conveyor section/assembly images to reflect the current design.
65 Updated conveyor section/assembly images to reflect the current design.
66 Updated conveyor section/assembly images to reflect the current design.
Removed part number 108631 from the title of the first image at the top of
69
the page, added part number 1GEABX-AS971 to the Zone 1 image.
Removed part number 108632 from the title of the first image at the top of
70
the page, added part number 1GEABX-AS976 to the Zone 1 image.
Added the Exploded View of Part Number 109864 and updated the
71
exploded view of part number 109389.
In the Entrance Section Replacement Part chart, the Part Number for the
76
Prox Switch w/12’ Cord was 1ELECT-SN357, now is 1ELECT-SN360.
Added section 4 Roller for Standard Dollie & updated section BIS-6 Roller
77
for Optional Dollie.